Jaguar Vanden Plas Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(53)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(53)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Jaguar Vanden Plas Throttle Body Replacement is $528 with $388 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Jaguar Vanden PlasV8-4.0LService typeThrottle Body ReplacementEstimate$6232.30Shop/Dealer Price$7760.63 - $12325.35
2000 Jaguar Vanden PlasV8-4.0L TurboService typeThrottle Body ReplacementEstimate$6224.89Shop/Dealer Price$7749.20 - $12311.81
2004 Jaguar Vanden PlasV8-4.2LService typeThrottle Body ReplacementEstimate$966.49Shop/Dealer Price$1166.70 - $1753.76
1996 Jaguar Vanden PlasL6-4.0LService typeThrottle Body ReplacementEstimate$1384.47Shop/Dealer Price$1698.73 - $2631.08
1999 Jaguar Vanden PlasV8-4.0LService typeThrottle Body ReplacementEstimate$6224.89Shop/Dealer Price$7752.94 - $12318.36
2009 Jaguar Vanden PlasV8-4.2LService typeThrottle Body ReplacementEstimate$1341.87Shop/Dealer Price$1642.68 - $2532.77
2003 Jaguar Vanden PlasV8-4.0L TurboService typeThrottle Body ReplacementEstimate$6224.89Shop/Dealer Price$7749.26 - $12311.92
Show example Jaguar Vanden Plas Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(53)

Rating Summary
50
3
0
0
0
50
3
0
0
0

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Jaguar Vanden Plas V8-4.2L - Spark Plugs - Peoria, Arizona
He is best mechanic I’ve had in a while. Very knowledgeable on vehicles and his personality is awesome . He has been out several times. Definitely will use them again.

Larry

17 years of experience
148 reviews
Larry
17 years of experience
Jaguar Vanden Plas V8-4.2L - Mass Airflow Sensor - Westerville, Ohio
Larry showed up on time, with the correct parts and finished the job early. He was knowledgeable, professional and had a great attitude. Thanks, Larry! Mark H. Westerville, OH

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Jaguar Vanden Plas V8-4.0L - Thermostat - Castro Valley, California
Albert was my mechanic. Stefan was not available. Albert did fixed the problem.

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Jaguar Vanden Plas V8-4.0L - Oil Change - North Las Vegas, Nevada
Raymond did a great job thank you Raymond

Excellent Rating

(53)

Rating Summary
50
3
0
0
0
50
3
0
0
0
Number of Jaguar Vanden Plas services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
500+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Nevada
Nevada is comprised primarily of desert terrain, but that doesn’t mean there is nothing to see. Over thousands - even millions - of years, natural occurrences like erosion, high winds, and torrential rains have made this state’s land what it...
How to Register a Car in California
All All vehicles must be registered through the DMV of California or through CaReg, which is an online registration approved by the state. If you have just moved to California, your vehicle must be registered within 20 days of establishing...
How to Prepare for the Kansas Driver’s Written Test
If If you are excited about the prospect of driving and getting your license, you first need to get your permit by passing the Kansas driver’s written test. The goal of the test is to show the state that you...

Problem with filling tank. Code says bad evap canister/valve and/or gas cap

Hi there. More often than not, the issues filling up the fuel tank is attributed to a bad EVAP vent solenoid (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-evaporation-vent-solenoid). It is the job of the EVAP vent solenoid to allow air into the charcoal canister so that...

Front driver side tire moves side to side when jacked up

If you can move the tire in and out when on a jack then you may have a few different possible problems. The inner or outer tie rod ends may be worn. Your steering gear may also have worn bushings....

Check eng on

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com