Isuzu Pickup Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Isuzu Pickup Water Pump Replacement is $215 with $110 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1983 Isuzu PickupL4-2.2L DieselService typeWater Pump ReplacementEstimate$381.69Shop/Dealer Price$456.49 - $656.14
1994 Isuzu PickupL4-2.6LService typeWater Pump ReplacementEstimate$432.24Shop/Dealer Price$515.59 - $725.06
1981 Isuzu PickupL4-2.2L DieselService typeWater Pump ReplacementEstimate$359.69Shop/Dealer Price$434.51 - $634.17
1993 Isuzu PickupL4-2.6LService typeWater Pump ReplacementEstimate$432.24Shop/Dealer Price$515.55 - $724.99
1994 Isuzu PickupL4-2.3LService typeWater Pump ReplacementEstimate$448.88Shop/Dealer Price$528.18 - $711.92
1984 Isuzu PickupL4-2.2L DieselService typeWater Pump ReplacementEstimate$359.69Shop/Dealer Price$434.51 - $634.17
1986 Isuzu PickupL4-2.2L Turbo DieselService typeWater Pump ReplacementEstimate$495.18Shop/Dealer Price$582.69 - $791.88
1986 Isuzu PickupL4-2.3LService typeWater Pump ReplacementEstimate$460.88Shop/Dealer Price$540.71 - $724.84
Show example Isuzu Pickup Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0

Mohammed

9 years of experience
152 reviews
Mohammed
9 years of experience
Isuzu Pickup L4-2.3L - Car is not starting - Raleigh, North Carolina
Although my appointment was scheduled for Friday, Mohammed called and was able to come Thursday afternoon. He was concerned that I may have been stranded, and did not know the appointment was for a second vehicle. I was impressed with that alone. Once there he quickly diagnosed the trouble and showed me several things that was causing the vehicle to fail to start. He also recommended several items in need of repair. He was a pleasure to work with and I feel confident in hiring him again for recommended repair work.

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Isuzu Pickup L4-2.3L - Oil Pan Gasket - Manor, Texas
Ran into some issues but stuck it out and took his time to get it done right.

Justin

8 years of experience
372 reviews
Justin
8 years of experience
Isuzu Pickup L4-2.3L - Engine hesitates during acceleration - Boca Raton, Florida
He arrived early and spent time attempting an old school diagnosis on a 23-year-old vehicle and believe he found the problem.

David

37 years of experience
39 reviews
David
37 years of experience
Isuzu Pickup L4-2.3L - Whining sound when car is in gear - Manor, Texas
It was cool. Diagnosed problem right away

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0
Number of Isuzu Pickup services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

P0001 OBD-II Trouble Code: Fuel Volume Regulator Control Circuit/Open
P0001 trouble code definition The P0001 code is associated with the electrical circuit which connects to your fuel pressure regulator....
How to Prevent Spills in Your Trunk
The The purpose of a car trunk (https://www.yourmechanic.com/article/how-long-does-a-trunk-latch-last) or hatch is simple. Its purpose is to carry or store items securely, including groceries, large items, and spare fluids. There is virtually no limit to what you can carry in your...
How to Replace an Intermittent Wiper Relay
If the windshield wipers function on high and low but do not work on the intermittent setting, then your intermittent wiper relay may be faulty.

Engine noise when accelerating

Hi. There could be a couple of things causing this noise. There could bring a bad bearing in one of the idler pulleys for the serpentine belt. The serpentine belt tensioner could be going bad causing the noise you hear....

Can't press the gas and car won't stay crank

Hello. This may be a sign of a failing throttle position sensor. The throttle position sensor is a sensor used to monitor the throttle position of the throttle plate inside the throttle body in relation to your foot position on...

I put 2 quarts of engine oil too much in my car possibly, then a hour later engine came on indicating 02 sensor (bank 2, sensor 1)

Hi Colette. It is very difficult to say for certain if the added oil is what triggered the error code you have described. The O2 sensor is attached to the exhaust system, so added oil should not impact the exhaust...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com