Isuzu Pickup Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(7)

Brake Pad Replacement Estimate for Isuzu Pickup

Isuzu Pickup Brake Pad Replacement costs $203 on average.

CarServiceEstimateShop/Dealer Price
1987 Isuzu PickupL4-1.9LService typeBrake Pads - Rear ReplacementEstimate$258.52Shop/Dealer Price$308.71 - $405.72
1986 Isuzu PickupL4-2.3LService typeBrake Pads - Front ReplacementEstimate$338.03Shop/Dealer Price$414.96 - $617.80
1983 Isuzu PickupL4-2.2L DieselService typeBrake Pads - Rear ReplacementEstimate$273.94Shop/Dealer Price$329.54 - $448.85
1992 Isuzu PickupL4-2.6LService typeBrake Pads - Rear ReplacementEstimate$374.91Shop/Dealer Price$460.27 - $685.69
1982 Isuzu PickupL4-2.2L DieselService typeBrake Pads - Rear ReplacementEstimate$273.94Shop/Dealer Price$329.57 - $448.89
1990 Isuzu PickupL4-2.3LService typeBrake Pads - Rear ReplacementEstimate$374.91Shop/Dealer Price$460.30 - $685.73
1984 Isuzu PickupL4-2.2L DieselService typeBrake Pads - Rear ReplacementEstimate$282.44Shop/Dealer Price$337.81 - $456.94
1994 Isuzu PickupL4-2.3LService typeBrake Pads - Rear ReplacementEstimate$380.41Shop/Dealer Price$466.06 - $691.69
Show example Isuzu Pickup Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

David

37 years of experience
39 reviews
David
37 years of experience
Isuzu Pickup L4-2.3L - Whining sound when car is in gear - Manor, Texas
It was cool. Diagnosed problem right away

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Isuzu Pickup L4-2.3L - Oil Pan Gasket - Manor, Texas
Ran into some issues but stuck it out and took his time to get it done right.

Mohammed

9 years of experience
152 reviews
Mohammed
9 years of experience
Isuzu Pickup L4-2.3L - Car is not starting - Raleigh, North Carolina
Although my appointment was scheduled for Friday, Mohammed called and was able to come Thursday afternoon. He was concerned that I may have been stranded, and did not know the appointment was for a second vehicle. I was impressed with that alone. Once there he quickly diagnosed the trouble and showed me several things that was causing the vehicle to fail to start. He also recommended several items in need of repair. He was a pleasure to work with and I feel confident in hiring him again for recommended repair work.

Justin

8 years of experience
372 reviews
Justin
8 years of experience
Isuzu Pickup L4-2.3L - Engine hesitates during acceleration - Boca Raton, Florida
He arrived early and spent time attempting an old school diagnosis on a 23-year-old vehicle and believe he found the problem.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Isuzu Pickup services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Understanding the Plymouth Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Plymouth service indicator lights indicate when and what service your car needs.
How Long Does a Flex Coupling Steering Damper Last?
There There are a number of different components used in your vehicle to help control the amount of vibration you and your passengers feel as you're driving. One of those is the flex coupling-steering damper. Specifically this part tones down...
Rules of the Road For Hawaii Drivers
While While you may be comfortable with the rules for driving on the roads in your own state, they may not be the same when you go to another state. If you are planning on visiting or moving to Hawaii,...

Brake fluid puddle on carpet. Resevior is empty, filled it, and it emptied again

This suggests you have a leak near your brake booster or master cylinder where the rod enters the master cylinder. This may also be related to the clutch master cylinder as well as your car has a clutch master cylinder...

I hear a whooshing sound when I turn the steering wheel. If I make a sharp turn, I hear a grinding sound coming from the back. ???

Hi there. In most cases, the rear knocking sound is caused by the driveshaft, drive axles, differential gears, transmission mount, or the rear struts. The sound you're experiencing is very difficult to diagnose, but could be caused by the power...

Jerking and violent shaking when accelerating. Cvt engine, Nissan Murano 04

It is possible that you could be having an issue with your transmission. I would recommend having your transmission inspected by a qualified transmission specialist to determine the exact cause of this issue. The same as normal Transmissions and therefore...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com