Isuzu i-350 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(312)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(312)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Isuzu i-350 Fuel Injector Replacement is $1446 with $943 for parts and $503 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-350L5-3.5LService typeFuel Injector ReplacementEstimate$2495.03Shop/Dealer Price$3019.43 - $4473.37
Show example Isuzu i-350 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(312)

Rating Summary
289
13
0
2
8
289
13
0
2
8

Luis

15 years of experience
175 reviews
Luis
15 years of experience
Isuzu Axiom V6-3.5L - Fuel Injector - Las Vegas, Nevada
This is my second time having Luis service my car, and I am extremely satisfied with the work he's done on my car. I would recommend his services to others without hesitation.

Lucas

21 years of experience
885 reviews
Lucas
21 years of experience
Isuzu Rodeo V6-3.2L - Smoke from engine or exhaust - Los Angeles, California
Great experience! My car was smoking a ittoe. Lucas came, went through the whole vehicle searching for the cause and included me in the process. It is thought that it might be the radiator cap. Lucas instructed me on what to do and what to look for. If in a 24 hour period it resumes smoking he will return. Did I mention that it was pouring down raining ? Hopefully his recommendation works but if not, I know who to call. Thanks Lucas.

John

27 years of experience
45 reviews
John
27 years of experience
Isuzu Ascender L6-4.2L - Car is not starting - Port Saint Lucie, Florida
I LIKED HIM. FINE FELLOW. HONEST. MAYBE SOME DAY WE WILL MEET AGAIN.

Rod

17 years of experience
210 reviews
Rod
17 years of experience
Isuzu Rodeo Sport V6-3.2L - Brake Pads Replacement (Front, Rear) - Pompano Beach, Florida
Rod show up on time and did a very well job replace my breaks

Excellent Rating

(312)

Rating Summary
289
13
0
2
8
289
13
0
2
8
Number of Isuzu services completed
3432+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Oil Pan
Common signs include puddles of oil under the car, leaks around the oil drain plug, and visible damage to the oil pan.
How Much More Money Can You Earn as an ASE Certified Mechanic?
Automotive technician jobs pay 20-30% more than the average mechanic salary when ASE certified. Take ASE tests to increase your technician salary.
P2041 OBD-II Trouble Code: Reductant Injector Air Press Sensor Circuit Intermittent
P2041 means there is a malfunction in the reductant injector air pressure sensor circuit. This could be due to damaged electrical components.

Idling erratically.

There is a possibility that your ECM could be causing your idling issue. However in my experience control modules do not go bad very often. The problem could be as simple as a throttle body that needs to be cleaned...

My car is making a squealing sound when it cranks and when I turn on the A/C

Hi, thanks for writing in. What you're describing sounds a lot like an AC belt (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ac-belt) that is loose or the serpentine belt on your alternator loose (or a combination of both). A common mistake that some mechanics make is...

Hi yes my car is leaking [coolant](/topics-coolant-ford/) but not running hot or overheating

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com