Isuzu i-350 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(313)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(313)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Isuzu i-350 Car is slow to accelerate Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-350L5-3.5LService typeCar is slow to accelerate InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
Show example Isuzu i-350 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

Nolan

30 years of experience
225 reviews
Nolan
30 years of experience
Isuzu Rodeo V6-3.2L - Check Engine Light is on Inspection - Tucson, Arizona
Did a great job explaining what was wrong and what it would take to fix it. Really kind and helpful. Didn't pressure me to accept any service. Just felt like a really honest and helpful guy.

Jeremy

20 years of experience
642 reviews
Jeremy
20 years of experience
Isuzu Ascender V8-5.3L - Heater Blower Motor - West Palm Beach, Florida
Jeremy was great. He arrived on time, was knowledgeable, professional, and courteous. He took the time out to answer questions and explain what he was doing. I will definitely use his expertise and service again.

Lucas

21 years of experience
893 reviews
Lucas
21 years of experience
Isuzu Rodeo V6-3.2L - Check Engine Light is on - Los Angeles, California
Really great service.

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Isuzu Rodeo V6-3.2L - Car idle is rough - Los Angeles, California
VERY SATISFIED! There are a few things that need repaired and I told him I would call to have HIM take care of those issues after the holidays.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Main Relay (Computer/Fuel System)
Common signs include the engine not starting, inability to stay running for a long time, and the Check Engine Light coming on.
P2056 OBD-II Trouble Code: Reductant Injector Circuit/Open Bank 2 Unit 2
P2056 P2056 trouble code definition The diagnostic trouble code P2056 indicates that the reductant injector that is located on bank 2 of the exhaust (system) has an open circuit. Related Trouble Codes: P2047 OBD-II Trouble Code: Reductant Injector Circ/Open Bank...
How to Replace a Cooling Fan Resistor
The cooling fan may not work at all speeds if the resistor is broken. If the engine overheats or the fan never turns off, the resistor may be faulty.

Car lost power steering, leaking coolant.

Hello it sounds like you have two problems here. Both of theses should be handled sooner than later. For the power steering the fluid level should be checked and see if the belt is on the pulley. If the fluid...

My car is hesitant to shift

Hi, thanks for writing in. Check your transmission fluid level (https://www.yourmechanic.com/article/how-to-check-and-add-fluid-to-an-automatic-transmission) to be sure the fluid level on the dipstick is exactly where it is supposed to be. Both too high and too low levels can cause problems. Shifting problems...

car will crank but won't start

At 200 thousand miles it could really be just about anything. But the good news is that car that cranks but will not start is usually the easiest kind of problem to diagnose. Your car needs fuel, ignition, and compression...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com