Isuzu i-350 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(312)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(312)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Isuzu i-350 Throttle Body Replacement is $657 with $562 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-350L5-3.5LService typeThrottle Body ReplacementEstimate$1239.33Shop/Dealer Price$1530.42 - $2381.17
Show example Isuzu i-350 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(312)

Rating Summary
289
13
0
2
8
289
13
0
2
8

Adrian

31 years of experience
75 reviews
Adrian
31 years of experience
Isuzu Trooper V6-3.2L - Alternator Repair - Merced, California
Adrian is good mechanic.

Theodore

16 years of experience
1587 reviews
Theodore
16 years of experience
Isuzu Ascender L6-4.2L - Ignition Coil - Bellevue, Washington
Theodore was very professional and friendly. Theodore was methodical with his diagnostics and quickly found the issue. The issue was resolve on the same visit. I would highly recommend Theodore. All this and a great price.

James

30 years of experience
873 reviews
James
30 years of experience
Isuzu Trooper V6-3.5L - ABS Light is on - Orlando, Florida
James was a pleasure to interact with and very thorough. I will be using him again. Thanks for the great service and help!

Walter

46 years of experience
341 reviews
Walter
46 years of experience
Isuzu Trooper V6-2.8L - Oil Change - Tulsa, Oklahoma
Very nice man! Did the job and then some.

Excellent Rating

(312)

Rating Summary
289
13
0
2
8
289
13
0
2
8
Number of Isuzu services completed
3432+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

How Are High-Performance Ignition Systems Different from Standard Ones?
Once Once upon a time, there was only one type of ignition system. It used a distributor, points, a coil, and was subject to significant wear and tear. Then came the electronic ignition, which replaced the points with an electronic...
What Is the Difference Between a 4-Stroke and 2-Stroke Engine?
Four-stroke and two-stroke engines have similar components, but don't work the same way. Four-stroke engines are often found in off-road vehicles.
P0284 OBD-II Trouble Code: Cylinder 8 Contribution/Balance Fault
P0284 P0284 code definition The P0284 code being stored indicates that your number eight cylinder is suffering from a problem related to fuel and, thus, can’t function properly. What the P0284 code means Your vehicle’s PCM keeps track of the...

Popping sound when turning

Going over a bump puts extra strain on your suspension parts. The joint that the wheels move up and down on are the main issue when you hear popping over bumps and gag through turns. I would have your suspension...

Feels like something it grinding

It sounds like you may have a failing or worn out wheel bearing. A wheel bearing (https://www.yourmechanic.com/services1/wheel-bearings-replacement) will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the surface of...

Rear shock creaks when turning steering wheel.

If the shock has worn out bushings or the U bracket was overtightened it may be hitting metal to metal and U bracket is rubbing metal of shock. Check bracket and shock bushings.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com