Isuzu i-290 Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(329)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(329)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Isuzu i-290 Fuel Pump Replacement is $785 with $386 for parts and $399 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Isuzu i-290L4-2.9LService typeFuel Pump ReplacementEstimate$1214.09Shop/Dealer Price$1417.44 - $2004.39
2007 Isuzu i-290L4-2.9LService typeFuel Pump ReplacementEstimate$1188.41Shop/Dealer Price$1386.72 - $1969.90
Show example Isuzu i-290 Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8

James

9 years of experience
128 reviews
James
9 years of experience
Isuzu i-290 L4-2.9L - Car is not starting - Newnan, Georgia
James was on time and was very thorough in his inspection despite temperatures being below freezing outside while he worked. He was quick in his assessment and even gave us a discount for being first time customers. We’ll gladly use his services again if needed.

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Isuzu Rodeo V6-3.2L - Fuel Pump - Cardiff By The Sea, California
Duane goes above and beyond as always. Fantastic service, great communication, quality work and incredibly knowledgeable.

Benji

23 years of experience
309 reviews
Benji
23 years of experience
Isuzu Rodeo V6-3.2L - Fuel Pump - San Tan Valley, Arizona
We had a little problem getting the right fuel pump but it was not Benji fault. Benji was great and he did a wonderful job on my Rodeo.

Kevin

18 years of experience
88 reviews
Kevin
18 years of experience
Isuzu Ascender L6-4.2L - Shift Selector Cable - Philadelphia, Pennsylvania
Very knowledgeable, was able to answer questions I had

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8
Number of Isuzu services completed
3619+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

P2702 OBD-II Problem Code: Trans Friction Element C Apply Time Range/Performance
P2702 means that a malfunction has occurred with the transmission friction element’s application due to leaks or low transmission fluid.
What Does the Automatic Transmission/Automatic Gearbox Warning Light Mean?
The automatic transmission warning light means there's an issue with the transmission, possibly the fluid temperature, fluid level, or pressure.
P2323 OBD-II Trouble Code: Ignition Coil H Secondary Circuit
P2323 P2323 code definition Ignition Coil H Secondary Circuit What the P2323 code means This trouble code indicates that the powertrain control module has detected a malfunction in the primary or secondary circuit in one or more of the ignition...

Steering wheel vibrates - 2004 Acura TSX

You have something loose and worn in the linkage of your front end. It is most likely a tie rod end (https://www.yourmechanic.com/services/tie-rod-end-replacement) but your front end will need to be inspected to pinpoint the worn part. The hard steering could...

Randomly shuts off no matter how much fuel is in vehicle, no acceleration/stalling when pushing pedal.

Hello and thank you for writing in! When was the last time you changed the fuel filter? The filter can have a huge effect on how much fuel is delivered to the engine. With the age of your vehicle, there...

o2b1s1= 1.95 V , o2b1s2=0.70 V , P0420

The upstream oxygen sensor appears to be out of range. The expected value should be between 0.2 and 0.9 volts with a frequency of 1 to 5 Hertz. Your report shows 1.9 volts. I would first look at a real...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com