Isuzu Amigo Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Isuzu Amigo Car Thermostat Replacement is $207 with $67 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Isuzu AmigoL4-2.6LService typeCar Thermostat ReplacementEstimate$322.16Shop/Dealer Price$367.55 - $495.62
1999 Isuzu AmigoV6-3.2LService typeCar Thermostat ReplacementEstimate$481.88Shop/Dealer Price$539.96 - $706.76
1998 Isuzu AmigoL4-2.2LService typeCar Thermostat ReplacementEstimate$376.17Shop/Dealer Price$435.57 - $609.60
1999 Isuzu AmigoL4-2.2LService typeCar Thermostat ReplacementEstimate$376.17Shop/Dealer Price$435.57 - $609.60
1991 Isuzu AmigoL4-2.3LService typeCar Thermostat ReplacementEstimate$315.15Shop/Dealer Price$360.77 - $490.14
1990 Isuzu AmigoL4-2.3LService typeCar Thermostat ReplacementEstimate$315.15Shop/Dealer Price$359.44 - $487.81
1991 Isuzu AmigoL4-2.6LService typeCar Thermostat ReplacementEstimate$315.15Shop/Dealer Price$359.31 - $487.59
1992 Isuzu AmigoL4-2.6LService typeCar Thermostat ReplacementEstimate$311.01Shop/Dealer Price$354.12 - $479.28
Show example Isuzu Amigo Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

James

31 years of experience
1039 reviews
James
31 years of experience
Isuzu Amigo V6-3.2L - Alternator - Apopka, Florida
Arrived on time! Surmised problem correctly and started work immediately. Replaced alternator with minimal problems. Safety check and inspections completed. 5 Stars professional service. Completely satisfied and will utilize James again. Thanks so much, JV

Keith

17 years of experience
1 reviews
Keith
17 years of experience
Isuzu Amigo V6-3.2L - Car is not starting - Sacramento, California
Explains everything very clearly. Knowledgeable and efficient. Gave honest opinion and recommendation for my current position.

Chuy

15 years of experience
503 reviews
Chuy
15 years of experience
Isuzu Amigo V6-3.2L - Pre-purchase Car Inspection - Elk Grove Village, Illinois
Great dude-- Thanks Chuy!

Shawn

24 years of experience
227 reviews
Shawn
24 years of experience
Isuzu Amigo V6-3.2L - Spark Plugs - Newport News, Virginia
Very professional, knowledgeable, respectful and polite.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Isuzu Amigo services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

P0682 OBD-II Trouble Code: Cylinder 12 Glow Plug Circuit
P0682 means that the PCM detects a variance in the reference voltage coming from the cylinder 12 glow plug circuit due to faulty plugs, or relays.
P0593 OBD-II Trouble Code: Cruise Control Multi-Function Input “B” Circuit High
P0593 means an error with the cruise control multi-function input B circuit, often caused by a interior spill that damages the cruise control switch.
How to Get a Missouri Driver's Permit
In In order to keep young drivers safe, Missouri uses a graduated driver’s license program called the “Ready Set Go!” program. All drivers between the ages of 15 and 18 must begin driving under supervision, in order to practice safe...

RPMs going up and down

This is most likely caused by a faulty Idle Air Control valve (IAC valve). This valve regulates the speed of the engine's idle by creating a controlled vacuum leak in the intake manifold. It is also possible that there may...

Original and replacement brake pedal feels softer the longer the SUV is driven

I am not aware of a change over of the brake booster from a vacuum style to an electrical style. This may be a new recall (https://www.yourmechanic.com/article/how-to-check-if-your-car-has-recalls) that I am not aware of, and I cannot comment on an ongoing...

I have code P0305 on it. Ive heard it's cylinder #5 misfiring but I don't know what the issue may be.

The code P0305 is indication that cylinder number 5 is not firing all the time. When you see the check engine light flashing then the cylinder is actively misfiring. You should have the spark plug and coil checked for problems...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com