Infiniti QX80 Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(34)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(34)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Infiniti QX80 Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2014 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2019 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2016 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2021 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2022 Infiniti QX80V8-5.6LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Infiniti QX80 Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(34)

Rating Summary
33
1
0
0
0
33
1
0
0
0

James

8 years of experience
128 reviews
James
8 years of experience
Infiniti QX80 V8-5.6L - Brake Pads Replacement (Rear) - Fayetteville, Georgia
Very informative, knowledgeable.

David

13 years of experience
421 reviews
David
13 years of experience
Infiniti QX80 V8-5.6L - Check Engine Light is on - Marietta, Georgia
Great experience

Michael

27 years of experience
516 reviews
Michael
27 years of experience
Infiniti QX80 V8-5.6L - Car is overheating - Gilbert, Arizona
Michael arrived promptly presented as professional, knowledgeable and friendly. Any repairs needed if the future I would request Michael. Also extremely pleased with the service, reccomend it to a friend and suggested to request Michael as well.

Daniel

9 years of experience
48 reviews
Daniel
9 years of experience
Infiniti QX80 V8-5.6L - Check Engine Light is on - Fort Lauderdale, Florida
Excellent service. Daniel came on time and fix the engine light my car had.

Excellent Rating

(34)

Rating Summary
33
1
0
0
0
33
1
0
0
0
Number of Infiniti QX80 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
900+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in California
Common Common sense, courtesy, and right-of-way laws work in combination to ensure your safety in traffic. This is why, when yielding the right of way means avoiding a collision that could cause harm to others, or damage to vehicles, you...
How to Replace a Car Glow Plug Timer
Glow plug timers let glow plugs know when to shut off in diesel engines. Symptoms of bad glow plug timers include hard starting or a Glow Plug Light.
B1948 OBD-II Trouble Code: Climate Control Water Temperature Sensor Circuit Short To Ground
B1948 means there is a fault in the coolant temperature signal circuit, likely due to a problem with one of the electrical components.

Need AC temperature actuator replaced.

Hi there, AC blowing cold from some vents while warming up in other vents may be an indication of a low refrigerant charge level. This is what is likely happening due to low refrigerant level: The air passing over the...

Engine shuts down when stopped at red lights

I don't have the repair information for your vehicle because it is so new. Since you can put the vehicle in park and start the vehicle, my guess is that you are also cycling the key. The fact that the...

Stalling vehicle when vdc and slip light comes on

Hi there. I've seen this same concern during my tenure as a Nissan service manager. What usually happens is the wire harness to those sensors becomes brittle and loose. When this happens, it does need to be replaced/repaired. The odds...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com