Infiniti Q50 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(166)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(166)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Infiniti Q50 Fuel Injector Replacement is $2082 with $1760 for parts and $322 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Infiniti Q50V6-3.0L TurboService typeFuel Injector ReplacementEstimate$8472.06Shop/Dealer Price$10509.23 - $16602.11
2018 Infiniti Q50V6-3.0L TurboService typeFuel Injector ReplacementEstimate$8590.79Shop/Dealer Price$10624.09 - $16710.40
2014 Infiniti Q50V6-3.7LService typeFuel Injector ReplacementEstimate$3855.52Shop/Dealer Price$4742.94 - $7388.35
Show example Infiniti Q50 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(166)

Rating Summary
155
3
1
1
6
155
3
1
1
6

Jacob

13 years of experience
329 reviews
Jacob
13 years of experience
Infiniti Q50 V6-3.0L Turbo - Brake Pads Replacement (Rear) - Plano, Texas
Very good. Very polite and did a great job.

Michael

28 years of experience
672 reviews
Michael
28 years of experience
Infiniti Q50 V6-3.7L - Alternator - Tempe, Arizona
Quick &

Harold

33 years of experience
52 reviews
Harold
33 years of experience
Infiniti Q50 V6-3.7L - Windshield Wiper Arm Replacement (Driver Side Front) - Jacksonville, Florida
Very professional, very friendly. Took care of my car, informed me of everything. First time using this service and if needed, will definitely use again.

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Infiniti Q50 V6-3.0L Turbo - Pre-purchase Car Inspection - Van Nuys, California
Lucas did a prepurchase inspection for me. Did a great job. Very through.

Excellent Rating

(166)

Rating Summary
155
3
1
1
6
155
3
1
1
6
Number of Infiniti Q50 services completed
1826+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Ford Escape
CUVs CUVs (Crossover utility vehicles) are becoming more and more popular these days, as consumers are interested in saving money and buying more eco-friendly vehicles but they still have a lot of people and cargo to move around. CUVs like...
How to Replace an AC Fan Control Module
The AC fan control module turns on the AC condenser and the radiator in some cars. The procedure to replace this module varies by make and model.
How Long Does an AC High Pressure Hose Last?
Your Your car’s AC system works very much like your home’s air conditioning in that it uses a refrigerant to hold heat and then to deliver cool air. Depending on the amount of pressure the refrigerant is under, it will...

What should I do before towing a trailer?

Towing even a small trailer with a light load requires that you take the right precautions before you hit the road. While there’s not a lot that must be done, there are several things you should ensure. Here’s what you...

The engine light is blinking, the car jolts when it car accelerates. And the engine songs like it wants to shut off sometimes

The flashing Check Engine Light tells me that the engine is having a misfire condition occurring. This could be due to bad spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) or ignition coils (https://www.yourmechanic.com/services/ignition-coil-replacement) as well as other sensor on the engine reading incorrectly. There...

What is the difference between engine oil warning light and another warning light just like that but with waves under the sign? 1996 Mitsubishi Galant

Hello- the warning light you mention is a " low coolant (https://www.yourmechanic.com/article/how-often-do-i-need-to-top-off-my-coolant)" indicator. Once the engine is cool - check your coolant reservoir and/or cooling system for proper fluid level. Since you seem to have lost fluid, I would recommend...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com