Infiniti M35h Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Infiniti M35h Front Crankshaft Seal Replacement is $289 with $37 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Infiniti M35hV6-3.5L HybridService typeFront Crankshaft Seal ReplacementEstimate$352.28Shop/Dealer Price$381.94 - $445.41
2012 Infiniti M35hV6-3.5L HybridService typeFront Crankshaft Seal ReplacementEstimate$336.06Shop/Dealer Price$360.16 - $419.45
Show example Infiniti M35h Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Jim

34 years of experience
225 reviews
Jim
34 years of experience
Infiniti M35h V6-3.5L Hybrid - Battery will not hold a charge - Livermore, California
On-time, friendly, knowledgeable, and thorough. I couldn't ask anything more. Thanks Jim!

David

14 years of experience
463 reviews
David
14 years of experience
Infiniti M35h V6-3.5L Hybrid - Pre-purchase Car Inspection - Marietta, Georgia
David is an excellent mechanic, on time and saved me from making a really big mistake.

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
Infiniti M35h V6-3.5L Hybrid - Oil Change - New Port Richey, Florida
On time, professional, good workmanship. Highly recommend

Joel

31 years of experience
89 reviews
Joel
31 years of experience
Infiniti M35h V6-3.5L Hybrid - Warning Light is on Inspection - Phoenix, Arizona
Joel was AMAZING!! Very helpful mad kind..

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Infiniti M35h services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

P0658 OBD-II Trouble Code: Actuator Supply Voltage “A” Circuit Low
P0658 means that there is a fault in the actuator supply voltage due to Shorted or open wires or damaged connectors in the PCM, or a control module.
Which Tires Are the Best for Highway Driving?
Highway Highway driving can mean different things to different people. Road surfaces are as vastly different depending on which part of the country you are in, as are the weather conditions. Some major factors to consider for highway driving are:...
Cell Phones and Texting: Distracted Driving Laws in South Carolina
In In South Carolina, it is illegal for drivers of all ages to text and drive, which includes emails and instant messages. However, there is no statewide ban on the use of handheld or hands free cell phones when making...

Transmission needs new clutch assembly will I damage the transmission further driving on it until the dealer gets the new part

If the dealer needs to overhaul the transmission for a bad or broken clutch, you may do additional damage (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-slipping-transmission) driving it before they get to the repair. My suggestion is to ask the service center that will be doing...

Seat belt sensors malfunction when car sits in heat

Hello. This is caused by the female part of the seat belt failing. The sensor in the receiver fails internally and will usually be susceptible to changes in temperature when it fails. It will need to be tested and replaced...

EPC light on 2004 Jetta. Code said brake switch faulty, but brakes lights worked. Replaced brake switch, now no brake lights.

Hi there. The first thing that pops in my mind beyond of what you have listed is perhaps the electrical harness attached to the brake switch. Perhaps the harness itself is damaged or you have an exposed wire, loose ground...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com