Infiniti J30 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Infiniti J30 Power Steering Pressure Hose Replacement is $662 with $354 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Infiniti J30V6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1049.18Shop/Dealer Price$1240.09 - $1781.62
1993 Infiniti J30V6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1029.36Shop/Dealer Price$1213.46 - $1749.89
1997 Infiniti J30V6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1029.36Shop/Dealer Price$1213.56 - $1750.06
1994 Infiniti J30V6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1029.36Shop/Dealer Price$1213.55 - $1750.05
1995 Infiniti J30V6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1029.36Shop/Dealer Price$1219.23 - $1759.98
Show example Infiniti J30 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Andy

5 years of experience
73 reviews
Andy
5 years of experience
Infiniti J30 V6-3.0L - Tail Lamp Bulb Replacement (Driver Side, Passenger Side) - San Jose, California
He was on time and professional. He fixed my tail light fast and was careful of the fragile trims.

Milton

38 years of experience
239 reviews
Milton
38 years of experience
Infiniti J30 V6-3.0L - Car is not starting - Henderson, Nevada
Excellent!

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Infiniti J30 V6-3.0L - Car is overheating - Spring, Texas
This gentleman is a true professional, I've been looking for a mechanic and I think i found one!

Braxton

12 years of experience
205 reviews
Braxton
12 years of experience
Infiniti J30 V6-3.0L - Car starts and then dies - Deltona, Florida
Great service. Prompt and professional

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Infiniti J30 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

What Is a Collapsed Hose?
Hoses are used extensively throughout your engine, and they’re all subject to pressurized fluid. However, collapse is usually only a problem...
Insurance Requirements for Car Registration in Virginia
The The state of Virginia requires that all drivers prove that they are financially responsible for costs associated with a car accident. Most drivers choose to purchase a car insurance policy to meet this requirement. However, drivers can also pay...
How Car Colors Affect Car Insurance Rates
Car paint color doesn’t affect the cost of car insurance or how often car owners are pulled over by the police.

22-gallon tank will only fill to 10 gallons

The fuel level sensor (https://www.yourmechanic.com/services/fuel-pressure-sensor-replacement) may be experiencing a malfunction especially if there have not been any performance concerns. Unfortunately, it is inside the fuel tank and must be removed to examine the contacts. This is common among many year...

Spike in costs around 120,000 miles?

Hi there. Your question of what to expect in service costs is difficult to answer. There are variables involved, whether the vehicle was driven hard by the previous owner(s), or whether the vehicle has had maintenance performed at the recommended...

Car slightly shutters when coming to an abrupt stop applying brakes hard. Failing master cylinder?

This may be a sign of warped brake rotors. As you may know, when you press on your brake pedal, this activates a hydraulic pressure which forces small pistons inside your brake calipers to push the brake pads against the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com