Infiniti FX45 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(27)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(27)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Infiniti FX45 Car Thermostat Replacement is $507 with $87 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Infiniti FX45V8-4.5LService typeCar Thermostat ReplacementEstimate$639.88Shop/Dealer Price$702.50 - $847.84
2003 Infiniti FX45V8-4.5LService typeCar Thermostat ReplacementEstimate$612.85Shop/Dealer Price$666.20 - $804.58
2006 Infiniti FX45V8-4.5LService typeCar Thermostat ReplacementEstimate$612.85Shop/Dealer Price$666.33 - $804.81
2005 Infiniti FX45V8-4.5LService typeCar Thermostat ReplacementEstimate$612.85Shop/Dealer Price$666.32 - $804.80
2008 Infiniti FX45V8-4.5LService typeCar Thermostat ReplacementEstimate$612.85Shop/Dealer Price$674.06 - $818.34
2004 Infiniti FX45V8-4.5LService typeCar Thermostat ReplacementEstimate$612.85Shop/Dealer Price$667.06 - $806.09
Show example Infiniti FX45 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(27)

Rating Summary
26
1
0
0
0
26
1
0
0
0

Leo

17 years of experience
80 reviews
Leo
17 years of experience
FX45 2003 - Check Engine Light is on - Greensboro, NC
Very knowledgeable and gave me a detailed description of the issue. Will continue using him anytime he’s available.

Robert

18 years of experience
191 reviews
Robert
18 years of experience
FX45 2008 - Hood Lift Support Shocks - Colleyville, TX
Great mechanic!

Clarissa

21 years of experience
227 reviews
Clarissa
21 years of experience
FX45 2003 - Car is not starting - Philadelphia, PA
Polite and courstous, seem to be knowledgeable in her field of work.

Scott

30 years of experience
950 reviews
Scott
30 years of experience
FX45 2006 - Car AC Repair - Phoenix, AZ
Diagnosed the issue with my A/C got to work and finished it quickly. The unit is better than ever.

Excellent Rating

(27)

Rating Summary
26
1
0
0
0
26
1
0
0
0
Number of Infiniti FX45 services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

P0659 OBD-II Trouble Code: Actuator Supply Voltage "A" Circuit High
P0659 means there is an issue or malfunction with the actuator supply voltage "A", which may be caused by faulty wiring or control module issues.
How to Buy a Personalized License Plate in Hawaii
There There is perhaps no better way to customize your vehicle than with a personalized license plate. A personalized license plate allows you to say something truly unique with your vehicle. You can project a sentiment or word, show pride...
How to Prepare for the Wyoming Driver’s Written Test
If If you want to drive in Wyoming, one of the first things you need to do is to make sure you pass the driver’s written test. You need to pass this test before you can get your learner’s permit,...

Steering wheel clicks when turned and rattles over some bumps and bad roads

At 47,000 miles, I would not suspect your steering column is worn. Depending on the history (wrecks, fender benders, potholes, etc), you may have worn out components in your front suspension. A clunking noise over bumps is likely a sway...

4x4 light flashing but not engaging into 4 wheel drive

Hello there, many common faults will cause your 2007 Toyota Tundra to have the four wheel drive light flashing. The most common faults are a faulty four wheel drive switch, actuator failure, low transfer case fluid, or a shift cable...

Transmission making noise that relates to engine rpm.

Hi there. Shut the engine off and check the fluid on the transmission dipstick. If the transmission fluid is low and not registering on the dipstick, then top it off until it reads full. Then start the vehicle and top...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com