Infiniti FX37 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Infiniti FX37 Intake Manifold Gaskets Replacement is $351 with $99 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Infiniti FX37V6-3.7LService typeIntake Manifold Gaskets ReplacementEstimate$476.42Shop/Dealer Price$537.12 - $693.69
Show example Infiniti FX37 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(17)

Rating Summary
15
2
0
0
0
15
2
0
0
0

Jerry

9 years of experience
136 reviews
Jerry
9 years of experience
Infiniti FX37 V6-3.7L - Oil Change - Duluth, Georgia
Very nice man! On time, a pleasure to have working on my vehicle. Will continue to book with in the future!

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Infiniti FX37 V6-3.7L - Oil Change - Menlo Park, California
Whitney is amazing. He is very professional and very thorough. In addition to the requested service, he also gave me great advise on getting the most out of my car. Highly recommended!

Fred

18 years of experience
389 reviews
Fred
18 years of experience
Infiniti FX37 V6-3.7L - Brake Pads Replacement (Front, Rear) - Humble, Texas
Friendly, quick, and professional. So far so good. I'm having him come back and look at my son's car next! :).

Stacy

25 years of experience
511 reviews
Stacy
25 years of experience
Infiniti FX37 V6-3.7L - Smoke from engine or exhaust - Conyers, Georgia
Knowledgeable!

Excellent Rating

(17)

Rating Summary
15
2
0
0
0
15
2
0
0
0
Number of Infiniti FX37 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

Is Rustproofing Your Car a Good Idea?
Rustproofing Rustproofing and undercoating your vehicle can protect it from corrosion and rust (https://www.yourmechanic.com/article/how-to-repair-a-rust-hole-in-your-car). This is especially important for the undercarriage of your vehicle, which commonly comes into contact with substances such as water, chemicals such as salt, and other...
How to Properly Use a Floor Jack and Jack Stands
Jack Jack stands (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-jack-stand) are important tools that keep a vehicle propped up after having used a floor jack (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-car-jack), like a scissor jack or a hydraulic jack, to lift a vehicle. Once the vehicle is lifted enough to fit...
The Traveler’s Guide to Driving in Denmark
Denmark Denmark is a country full of history and interesting places (http://www.visitdenmark.com/guide/denmarks-most-visited-attractions) to visit. It’s very popular with travelers for the beauty of the country and the friendliness of the people. You might want to visit Tivoli Gardens in Copenhagen....

The car was rebuilt after a front end collision and looks new Ford Fusion se 2015 it looks new they listing it for 9000 is it fair

You should be cautious of purchasing a vehicle with a rebuilt title or has been in a major accident. The vehicle typically never gets back to 100% of what it was before the accident and the value for you will...

After I got a passenger window installed by Safelite all my doors and trunk keep rapidly locking and unlocking while there is power.

The wiring in the door could be shorted to the door or they may not be hooked up properly. If the wiring is good, then the BCM (Body Control Module) may need to be flashed (reprogrammed). If you need further...

Need to know the A/C relay location on a 1982 European Mercedes-Benz 280sl.

The relay is on the driver side right next to the brake booster and master cylinder. It looks like a large black block by the fender. For the compressor to not have power to it, check the low pressure switch...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com