Hyundai Santa Fe XL Car door is sagging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7,329)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7,329)

Car door is sagging Inspection Service

How much does a Car door is sagging Inspection cost?

On average, the cost for a Hyundai Santa Fe XL Car door is sagging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Hyundai Santa Fe XLV6-3.3LService typeCar door is sagging InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2014 Hyundai Santa Fe XLV6-3.3LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Hyundai Santa Fe XLV6-3.3LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Hyundai Santa Fe XLV6-3.3LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2019 Hyundai Santa Fe XLV6-3.3LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Hyundai Santa Fe XLV6-3.3LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Hyundai Santa Fe XLV6-3.3LService typeCar door is sagging InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Hyundai Santa Fe XL Car door is sagging Inspection prices

A sagging car door can be incredibly frustrating. It may seem like a relatively insignificant problem, but in reality it can be a real inconvenience. Your door looks odd when opened and you're scared that it may fall off. It's a hassle to try and close a sagging door because it won't latch properly unless you're lifting the door to fit it in just right.

How this system works:

A car door operates the same way that a house door does. It relies on a hinge that connects the door to the body of your car. When you pull on your door handle, the pin in the middle of the car door hinge rotates, the hinge unfolds like a book that is opening, and the car door opens easily. When the hinges are functioning properly, they not only allow you to open and close the car door with ease, but they hold the door open without letting it sag.

Common reasons for this to happen:

Two primary issues can cause a car door to sag:

  • Hinge pin and bushings are worn: The hinge pin and bushings are what allow the hinges to open up. The pin is the long cylinder in the middle of the hinge, and the bushings are on the top and bottom of the pin. These pieces rotate as you open and close the door. Over time, the pin and bushings can wear out. When this happens, they become loose within the hinge, and are no longer able to hold as sturdy as they once did, resulting in the car door sagging.

  • Damaged or loose door hinge: The hinge that allows the door to swing open and closed is attached to both the door and the car frame. The hinge is attached with large bolts. Like all bolts, these can become loose from time to time, which causes the hinge to become loose. When the hinge is loose, the weight of the door is too much for the hinge, and the door will sag. Even if the bolts are tight, the hinge itself can become bent or damaged in a way that prohibits it from holding the door as firmly as it should.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the sagging car door and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The door hinge is a relatively easy part of your vehicle for a mechanic to inspect. The mechanic will check out the hinge and see what part is damaged or loose. The mechanic will then either replace the part in question, or replace the entire hinge assembly. They’ll also check to make sure that no damage has been done to the door or the frame.

How important is this service?

A sagging car door is a nuisance. And it's a problem that will only get worse if you neglect it. It will sag more and more until it's impossible to close the door. Therefore, you should schedule an inspection sooner rather than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(7,329)

Rating Summary
6,945
222
43
31
88
6,945
222
43
31
88

Mazyar

8 years of experience
493 reviews
Mazyar
8 years of experience
Hyundai Santa Fe XL V6-3.3L - Oil Change - Smyrna, Georgia
Fast and thorough.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Hyundai Elantra Coupe L4-1.8L - Brake Pads Replacement (Rear) - Conroe, Texas
Maxwell was on time, courteous and very knowledgeable. Did an amazing job. I will use him again when I need any type of service for my car in the future.

Daniel

11 years of experience
230 reviews
Daniel
11 years of experience
Hyundai Accent L4-1.6L - Top off coolant - Chicago, Illinois
Daniel expressed a second opinion concerning my car not starting. The new diagnosis saved me time and money. Much appreciated!

Juan

10 years of experience
216 reviews
Juan
10 years of experience
Hyundai Santa Fe L4-2.4L - Starter - Torrance, California
Very professional, friendly, and efficient. The invoice had a mistake and was quoting us way higher than what we were originally quoted. Juan made sure to only charge us the original price.

Excellent Rating

(7,329)

Rating Summary
6,945
222
43
31
88
6,945
222
43
31
88
Number of Hyundai services completed
80619+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

P0083 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit High (Bank 2)
P0083 P0083 code definition P0083 is a general OBD-II code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...
P2082 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 1
What What the P2082 code means? The P2082 code means that the exhaust gas temperature (EGT) sensor has been found to have out of range sensor readings. When these out of range sensor readings are found with the bank 2...
P0915 OBD-II Trouble Code: Gear Shift Position Circuit Range/Performance
P0915 means there is a limitation in the gearshift's ability to cover its full range due to corroded, damaged, disconnected, or broken wiring.

How does the HomeLink® transceiver work?

If you drive an EX-L V6, then your car came standard with Honda’s HomeLink® universal transceiver. It’s a handy device that’s built right into your car and is designed to work with other things around your home, like your garage...

Why won't my truck charge the battery?

Hi there. Several situations could prevent adequate charging from an otherwise healthy electrical system. These include poor connections at the batter posts, power cables at the alternator, ineffective grounding between the battery, chassis, and engine (good connections and large enough...

Is p0016 for sensor A or B on a 2010 2.4L ecotec 4cyl.

P0016 (https://www.yourmechanic.com/article/p0016-obd-ii-trouble-code-camshaft-position-a-camshaft-position-correlation-bank-1-by-jay-safford) pertains to the intake camshaft (i.e., position "A"). If that code has set, apart from a sensor fault, there are quite a few other potential causes of the code, including: incorrect camshaft timing due to the timing chain...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com