Hyundai Genesis Battery will not hold a charge Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(163)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(163)

Battery will not hold a charge Inspection Service

How much does a Battery will not hold a charge Inspection cost?

On average, the cost for a Hyundai Genesis Battery will not hold a charge Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Hyundai GenesisV8-5.0LService typeBattery will not hold a charge InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2013 Hyundai GenesisV8-5.0LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Hyundai GenesisV6-3.8LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Hyundai GenesisV8-4.6LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2012 Hyundai GenesisV8-5.0LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2011 Hyundai GenesisV8-4.6LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Hyundai GenesisV6-3.8LService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2012 Hyundai GenesisV8-4.6LService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Hyundai Genesis Battery will not hold a charge Inspection prices

Your car has a battery for a very good reason – it provides the initial power needed to crank the engine and get the car running. After that, the alternator takes over, providing the power for your accessories, as well as recharging the battery. If your battery has died and then recharged, and you’ve found that it will not hold a charge (the battery is fine for a little while, but then the charge dissipates), there’s a problem somewhere in your system that must be diagnosed and repaired.

How this system works:

In a normal system, it works like this: Your battery supplies power to the starter and the main relay. The main relay powers the fuel pump and computer. The battery also supplies the initial electric spark to the spark plugs. Once the engine is cranked, the alternator begins turning, which generates the electricity necessary to recharge the battery and to power the engine and other components.

The alternator should always provide enough electricity to recharge the battery and power your other components. If it does not, then the electricity needed comes from the battery and because it’s not being recharged, it will eventually die. Of course, automotive batteries have a limited lifespan – they should be checked regularly after they’re about three years of age (although it’s wise to have them checked at least twice a year no matter how new they might be).

If your battery won’t hold a charge, it means there are problems within the system that are either preventing the battery from being recharged, or draining the battery when the engine is off.

Common reasons for this to happen:

  • Bad Cell: Batteries will eventually die no matter what. They will develop a bad cell that prevents them from holding a charge and will need to be replaced. This is part of normal vehicle maintenance. Have your battery tested every Spring and Fall to ensure that you’re able to avoid being stranded by a failed battery. Batteries most commonly “die” during hot and cold weather.

  • Low Water: Some batteries have fill holes that allow you to maintain them, although most modern batteries are maintenance free and don’t allow you to add water. If you have a maintainable battery, topping off the water level may solve the problem.

  • Bad Alternator: If the alternator is not charging the battery while the engine operates, the battery will not hold a charge. This is most noticeable if you jump the battery and the engine runs for a while, only to eventually die. It is also observable by watching your headlights – while the engine is running, check the lights. If they start bright but slowly fade, chances are good that the problem is the alternator, not the battery.

  • Corroded Battery Cables: Battery cables and terminals can suffer from corrosion. As it builds up, this corrosion prevents solid contact, and can limit the charge being supplied to the battery from the alternator. Regular maintenance of your battery can prevent this.

  • Loose Alternator Belt: If the alternator belt is loose (old and stretched), it will not operate the alternator properly, which means that the charge the alternator produces may not be enough to recharge the battery.

  • Parasitic Drain: It might be that your battery and alternator are just fine, but there’s something else draining the charge. This could be something as simple as leaving the lights on, or having an accessory plugged in to an “always on” power outlet, or it could be a stuck relay or something else that’s pulling power from the battery when the engine isn’t running.

What to expect:

A top-rated mobile mechanic will come to your office, home or other location to inspect the battery, the alternator and other components of the charging system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will test your battery, alternator and starter. The mechanic will also check for parasitic drain and other problems that might make your battery not hold a charge. It may be necessary to replace your battery in order to diagnose other system-wide problems (if the battery has developed a bad cell).

How important is this service?

If your battery won’t hold a charge, it’s not safe to drive your car. Even if your alternator is working fine, turning the car off for something as simple as stopping at the gas station will mean that the engine won’t crank and you’ll need to jump it off. One of our top-rated mechanics can diagnose the problem and get you back up and running.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(163)

Rating Summary
156
6
0
0
1
156
6
0
0
1

TJ

26 years of experience
362 reviews
TJ
26 years of experience
Hyundai Genesis V6-3.8L - Battery - Fort Myers, Florida
top notch!!!

Jimmi

27 years of experience
231 reviews
Jimmi
27 years of experience
Hyundai Genesis V6-3.8L - Brake Master Cylinder - Orlando, Florida
On time, professional did the work we asked to have completed.

Paul

23 years of experience
292 reviews
Paul
23 years of experience
Hyundai Genesis V6-3.8L - Check Engine Light is on Inspection - Land O' Lakes, Florida
Great experience. Have recommended to friends.

Andy

30 years of experience
27 reviews
Andy
30 years of experience
Hyundai Genesis V8-4.6L - Brake Rotor/Disc Replacement (Front, Rear) - Newtonville, Massachusetts
After a number of failed previous attempts with other mechanics who did not show up and didn't text or had excuses. Andy did much better. He did not have the parts originally so he missed his earlier appointment, but he did text and explain. That was a plus. When he arrived, with parts, he set to work and worked long and hard on all four brakes rotors and pads. Some of the rotors were hard to get off because of rusted pins. Andy was remarkably and notably patient. He did not ever look act or sound frustrated. He came back and attended to the difficult rusted areas with lubricant, and spent time. He was able to take, process, and work with a couple of suggestions that this car owner had to help loosen rust (having been a chemistry-major). In conjunction with the new suggestions, he was able to make steady and ready progress with the rusted difficult cotter pins. Even though the job had taken longer than expected he was friendly and personable throughout, and insisted on doing the test run, test drive which was useful for having his expertise. He noticed some slight imperfection in the repair and was able to address that. We also noticed some other issues not part of the original brake job description. It was a great plus that he was there to recognize and discuss some other car issues. I was happy that a lot of the notations are compiled online for future reference by this car owner.

Excellent Rating

(163)

Rating Summary
156
6
0
0
1
156
6
0
0
1
Number of Hyundai Genesis services completed
1793+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

What are the Car Pool Rules in Florida?
Car Car pool lanes have become increasingly popular in the United States, and Florida is no exception to the new normal. While Florida doesn’t have as many miles of car pool lanes as many other states, they still have a...
P3411 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Control Circuit Low
P3411 means the system detected a problem with vehicle sensors due to electrical problems, bad solenoids, low oil pressure, or mechanical issues.
P2410 OBD-II Trouble Code: Fuel Cap Sensor/Switch Circuit Low
P2410 means there is a fault with the fuel cap sensor switch, possibly due to a bad sensor, improperly installed cap, or electrical defects.

Sounds like vacuum leak

When you suspect a vacuum leak on the engine it may be a cracked hose or a gasket leak. The best way to find it is to use a hose to your ear and move around the engine intake and...

Where is the power lock relay on a 2007 Mazda 5 for the front doors

Hello. The front and the rear locks all use the same relay located in the body control module. If only the front locks do not work then you either have a failure in the module or a circuit issue. The...

03 range rover cranks but will not start. getting injector and camshaft sensor errors. Sensors are brand new.

Hi there. Quite often, when you replace sensors and still are getting the error codes, it's due to the OBD-II trouble codes not being reset after the repairs being completed. However, it could also be a problem with the electrical...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com