Hyundai Equus Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Hyundai Equus Fuel Injector Replacement is $1331 with $953 for parts and $378 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2014 Hyundai EquusV8-5.0L	Service typeFuel Injector Replacement	Estimate$2787.28	Shop/Dealer Price$3389.20 - $5173.07
2011 Hyundai EquusV8-4.6L	Service typeFuel Injector Replacement	Estimate$3153.85	Shop/Dealer Price$3848.72 - $5922.20
2013 Hyundai EquusV8-5.0L	Service typeFuel Injector Replacement	Estimate$2762.95	Shop/Dealer Price$3360.17 - $5140.52
2015 Hyundai EquusV8-5.0L	Service typeFuel Injector Replacement	Estimate$2299.91	Shop/Dealer Price$2781.36 - $4214.43
2016 Hyundai EquusV8-5.0L	Service typeFuel Injector Replacement	Estimate$2299.91	Shop/Dealer Price$2785.34 - $4221.39
2012 Hyundai EquusV8-5.0L	Service typeFuel Injector Replacement	Estimate$2762.95	Shop/Dealer Price$3360.54 - $5141.18

Show example Hyundai Equus Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(30)

Rating Summary

29

1

0

0

0

29

1

0

0

0

SEE REVIEWS NEAR ME

Justin

9 years of experience

372 reviews

Justin

9 years of experience

by Jay

Hyundai Equus V8-5.0L - Car is not starting - Delray Beach, Florida

Excellent work done by Justin.

Corey

13 years of experience

511 reviews

Corey

13 years of experience

by Alex

Hyundai Equus V8-5.0L - Suspension Air Bag Replacement (Driver Side Rear, Passenger Side Rear) - Charlotte, North Carolina

Very knowledgeable and professional will use him always!!

Breck

21 years of experience

681 reviews

Breck

21 years of experience

by Ryan

Hyundai Equus V8-4.6L - Battery Light is on - Houston, Texas

Very knowledgeable and professional!

Benji

23 years of experience

309 reviews

Benji

23 years of experience

by janet

Hyundai Equus V8-5.0L - Car is not starting - Phoenix, Arizona

Prompt, courteous, friendly, did a great job.

Excellent Rating

(30)

Rating Summary

29

1

0

0

0

29

1

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

10 Best Stores to Buy Auto Parts in Saint Paul, Minnesota

Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Saint Paul is NAPA Auto Parts.

How Do Power Car Windows Increase Passenger Safety?

Power Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though power windows exert large amounts of...

B1941 OBD-II Trouble Code: Airbag Crash Sensor #1 Feed/Return Circuit Open

B1941 means there is a problem with the airbag circuit voltage, likely due to an issue with the front impact sensor or in a terminal.

Oil in coolant.

Oil in your coolant is a bad sign. This usually indicates a leaking head gasket or cracked head. A cooling system pressure test and block test will be able to determine this. I suggest having a qualified technician, such as...

Orange fluid leaking from radiator.

GM Dexcool antifreeze is orange in color, so you have a coolant leak. Performing a cooling system pressure test will pinpoint the origin of the leak. A trained professional, like one from YourMechanic, will be able to perform this test...

How much we would tail light socket and wiring cost

Hi there. It's possible that the issue you're having with brake lights is caused by either the brake light switch under the pedal, an electrical relay or the brake lights themselves. To know for certain what's causing this problem, it's...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com