Honda Pilot Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,290)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,290)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Honda Pilot Intake Manifold Gaskets Replacement is $368 with $102 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$620.66Shop/Dealer Price$694.98 - $899.31
2010 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$522.66Shop/Dealer Price$587.46 - $774.04
2017 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$481.68Shop/Dealer Price$536.29 - $692.16
2003 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$629.74Shop/Dealer Price$707.50 - $931.17
2014 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$490.70Shop/Dealer Price$550.36 - $715.10
2006 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$599.94Shop/Dealer Price$670.57 - $872.14
2009 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$522.66Shop/Dealer Price$587.54 - $774.17
2013 Honda PilotV6-3.5LService typeIntake Manifold Gaskets ReplacementEstimate$522.66Shop/Dealer Price$587.51 - $774.12
Show example Honda Pilot Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(1,290)

Rating Summary
1,224
39
3
6
18
1,224
39
3
6
18

Chad

17 years of experience
76 reviews
Chad
17 years of experience
Honda Pilot V6-3.5L - Car is not starting - Midlothian, Virginia
Very professional and friendly.

Ira

49 years of experience
283 reviews
Ira
49 years of experience
Honda Pilot V6-3.5L - Window Motor / Regulator Assembly Replacement (Driver Side Rear) - Tampa, Florida
Ira was prompt ( actually arrived earlier than the appointment time, which was fine with me). Discussed options ( with Honda part vs. OEM motor / regulator combo) and completed the work well ahead of time. He is a friendly, knowledgeable mechanic to work with.

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Honda Pilot V6-3.5L - Spark Plugs - San Antonio, Texas
Excellent!

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Honda Pilot V6-3.5L - Alternator Repair - Kansas City, Missouri
Andrew did a fine job. He called before the appointment and told me when he would be there, and he was on time. He installed the alternator with no problems and got us up an running. Even though it was approaching 100 degrees, he performed his job in very professional manner. I will ask for him again in the future. Thanks, Andrew.

Excellent Rating

(1,290)

Rating Summary
1,224
39
3
6
18
1,224
39
3
6
18
Number of Honda Pilot services completed
14190+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in Tampa, Florida
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Tampa is Advance Auto Parts.
The Top 5 Selling Cars in Kansas in 2012
Kansas Kansas sees a varied climate with all four seasons, which means drivers in the area choose a variety of vehicles. In years past, some of the front-runners have included the Ford F-150, Buick and Toyota Camry. 2012’s top five...
Child Seat Safety Laws in Mississippi
In In Mississippi, in 2008, 76% of children who died in motor vehicle accidents were not properly restrained. This should tell you how important it is that children be effectively restrained in motor vehicles, and why there are laws in...

Fuel gauge dropped dramatically and the gas tank looked like it was suctioned in because of a vacuum

Hi there, thanks for writing in your question and the details of your situation. Based off your information, I'd like to mention that the fuel fill tube has a fresh air inlet that should prevent this from happening. Either an...

My car had a hard time starting. 2008 Suzuki SX4

Hello. Depending on how hard the starting was would help me to determine what is going on. If the engine just had a hard time cranking then it may be a problem with the battery or the starter. It may...

My car is jerking every time I'm driving under 10mph or when I put it in reverse. And was wondering will my car stop on me

If you have a check engine light on then you may have an engine computer code stored pointing to the problem. You may have a misfire, broken motor mounts or a mass airflow sensor or intake tube leaks. Have a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com