Honda Element Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Honda Element Control Arm Assembly Replacement is $238 with $98 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Honda ElementL4-2.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$431.64Shop/Dealer Price$504.40 - $714.58
2010 Honda ElementL4-2.4LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$784.27Shop/Dealer Price$938.74 - $1397.20
2007 Honda ElementL4-2.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$707.55Shop/Dealer Price$849.80 - $1272.36
2011 Honda ElementL4-2.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$707.55Shop/Dealer Price$849.80 - $1272.36
2010 Honda ElementL4-2.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$422.63Shop/Dealer Price$495.12 - $705.10
2006 Honda ElementL4-2.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$422.63Shop/Dealer Price$493.79 - $702.77
2010 Honda ElementL4-2.4LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$422.63Shop/Dealer Price$493.66 - $702.55
2003 Honda ElementL4-2.4LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$784.27Shop/Dealer Price$938.77 - $1397.25
Show example Honda Element Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(16)

Rating Summary
15
0
0
1
0
15
0
0
1
0

Alexander

5 years of experience
126 reviews
Alexander
5 years of experience
Element 2011 - Control Arm Assembly - Hilliard, OH
Very nice and respectful. Explained things well, plus he was fast.

Peter

36 years of experience
1542 reviews
Peter
36 years of experience
Element 2004 - Control Arm Assembly - Chandler, AZ
Peter is Awesome!

Benji

20 years of experience
206 reviews
Benji
20 years of experience
Element 2004 - Control Arm Assembly - Phoenix, AZ
After my failed attempt to replace my control arms I contacted Yourmechanic. they sent out Benji. He was excellent. Installed the parts I bought and pointed out a mistake I had made in previous repair. The whole thing took very little time and when he was done everything was cleaner than I left it for him! Another perfect Mechanic from this site! Thanks!

John

0 years of experience
155 reviews
John
0 years of experience
Element 2003 - Control Arm Assembly - Austin, TX
John was great. It was a big job and he showed up when expected and completed the work faster than I expected. I would definitely recommend him.

Excellent Rating

(16)

Rating Summary
15
0
0
1
0
15
0
0
1
0
Number of Honda Element Control Arm Assembly Replacement services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

P0639 OBD-II Trouble Code: P0639 Throttle Actuator Control Range/Performance (Bank 2)
P0639 means there is an issue with the throttle actuator control, likely due to faulty wiring, or a part in throttle body is defective.
P2134 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch F Circuit Intermittent
What What the P2134 code means? P2134 is an OBD-II generic code for the engine control module (ECM) detecting the throttle pedal position sensor F has an intermittent sensor return to the ECM What causes the P2134 code? The ECM...
5 Essential Things to Know About Owning a Diesel Car
While While once relegated to industrial applications, diesel engines are quickly becoming a popular option for those looking for a new car. Thanks to the numerous advances in technology, the once smelly, noisy engines have come a long way, and...

What Are the Common Signs Your Drive Belt Needs Replacing?

Some signs that your drive belt should be replaced (https://www.yourmechanic.com/article/common-signs-your-drive-belt-needs-replacement) as soon as possible are: the drive belt wearing unevenly, several missing teeth in succession, or has been contaminated by oil. A faulty belt will usually emit squeaks or squeals....

Have replaced power steering pump three times. Works well for about a day and then stops. There is no leaks.

Hi there. The issue is not the pump. The pump will fail if the power steering control valve sticks and stops working. The power steering control valve (https://www.yourmechanic.com/services/power-steering-control-valve-replacement) is located in the rack and pinion steering system. If you need...

2007 Chrysler 300 wont turn over. Got the gear shift cable replaced the ignition switch replace and the #4 wire replaced or added

There might be a loose connection left in the wake of the repairs that you describe. The general procedure if your car's starter motor does not function at all is to first be sure the engine immobilizer system is not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com