Honda Crosstour Clear fluid is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(47)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(47)

Clear fluid is leaking Inspection Service

How much does a Clear fluid is leaking Inspection cost?

On average, the cost for a Honda Crosstour Clear fluid is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Honda CrosstourV6-3.5LService typeClear fluid is leaking InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Honda CrosstourL4-2.4LService typeClear fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Honda CrosstourV6-3.5LService typeClear fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Honda CrosstourL4-2.4LService typeClear fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2013 Honda CrosstourL4-2.4LService typeClear fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2014 Honda CrosstourL4-2.4LService typeClear fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Honda CrosstourV6-3.5LService typeClear fluid is leaking InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2013 Honda CrosstourV6-3.5LService typeClear fluid is leaking InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Honda Crosstour Clear fluid is leaking Inspection prices

Fluid leaking from a vehicle can be a concern for any driver. Regarding fluid leaks, the most important thing a vehicle owner can do is identify the kind of fluid leaking from their vehicle and where it is leaking from. Clear fluid leaking from a vehicle can range from the relatively harmless (water), to the potentially dangerous (brake fluid/gasoline). Being able to tell the difference between various fluids will help a mechanic gauge what sort of repair will need to be done. Location is also very important when considering fluid leaks. For example, a fluid leaking from underneath the engine is likely to require a different repair than a fluid leaking from around the middle, or back of a vehicle.

How this system works:

Vehicles require many different fluids to run effectively and efficiently. Knowing the difference between these various fluids can be very helpful when speaking with a mechanic, so that he or she can be better aware of what problems your vehicle may be experiencing. Many of the fluids your vehicle will need are filled or refilled through reservoirs in the engine bay. Being able to differentiate between different fluids can be especially helpful if you notice liquid pooling underneath the engine, as the engine area/front of the vehicle is a common place to see a leak. A clear fluid leak could be a number of things based upon the location of the leak. Water leaks tend to occur at the front of the vehicle when condensation forms on the vehicle’s air conditioning system. Brake fluid leaks tend to occur around the middle or back of the vehicle and tend to be seen directly under the path of a vehicle’s brake lines, or around the wheels. Gasoline leaks tend to occur toward the back of the engine around the area of the filler neck/gas tank.

Common reasons for this to happen:

  • Water from A/C: A clear fluid leaking from the front of the vehicle is likely to be water. If you have been running the A/C, condensation forms on a part of the air conditioning system called the evaporator. Water droplets then fall underneath the engine bay area. If you suspect a water leak, it is always best to examine the fluid to make sure it is not something more serious.

  • Failing Break Lines: Clear fluid leaking from the middle of the vehicle may be brake fluid. New brake fluid is typically clear, becoming yellow and even brown as it gets older. Brake fluid is also a different consistency than water, and feels slick to the touch. As brake lines get older and begin to rust, they may begin to fail, causing brake fluid to leak underneath the vehicle. Brake fluid leaking from around the wheel area may be because of worn wheel cylinder seals. Brake fluid leaks are potentially dangerous as the braking ability of your vehicle may be compromised by the loss of pressure in the braking system.

  • Leaking Gas Tank: Clear fluid leaking from the back of the vehicle may be gasoline. Gasoline is easiest to distinguish because of its unique smell and the rainbow effect it produces when seen on the ground in light. Gasoline leaks are potentially dangerous and can dramatically affect economy. Just like brake lines, the gas filler neck and tank can become rusty and fail, causing a leak.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the fluid that is leaking and where it is leaking from. The mechanic will then provide a detailed inspection report outlining the nature and cause of the leak and the cost of any repairs that need to be made.

How it's done:

A mechanic will first identify the type of fluid leaking and the origin of the leak. Providing the mechanic with this information can help save time and will give him or her a better idea of what the problem might be.

If the leak appears to be water coming from the front of the engine, the mechanic should check your vehicle’s air conditioning system to make sure it is working properly. If the leak appears to be brake fluid, the mechanic may have to replace brake lines or wheel cylinder seals. When replacing brake lines, it is wise to have all of lines replaced at the same time. This will guarantee that all the lines are new and will not be affected by corrosion in the same way the old lines were. The mechanic will then go through a process called “bleeding” in which excess air is removed from the braking system. They will then top off brake fluid as necessary. If the leak is from a wheel cylinder seal, the mechanic will also inspect brake shoes to ensure their effectiveness. If the leak appears to be gasoline, either the filler neck, gas tank, or both may need to be replaced.

The mechanic will determine what needs to be replaced and perform the necessary repairs. During the process, the mechanic will make sure that the new parts fit together nicely to ensure that there are no further leaks.

How important is this service?

All leaks are important to monitor, but clear fluid, especially if it leaking from the middle or back of the vehicle, is critical to have inspected. Leaking gasoline or brake fluid could potentially cause a fire or loss of braking ability. Vehicles will gasoline or brake fluid leaking should not be driven until they can be safely repaired by a mechanic. Being able to identify the different liquids your vehicle uses can help a mechanic quickly find the source of a problem and begin the necessary repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(47)

Rating Summary
47
0
0
0
0
47
0
0
0
0

Roberto

12 years of experience
307 reviews
Roberto
12 years of experience
Honda Crosstour V6-3.5L - Brake Pads Replacement (Front, Rear) - Houston, Texas
Everything went smoothly, will definitely used again!

Sonal

17 years of experience
20 reviews
Sonal
17 years of experience
Honda Crosstour V6-3.5L - Squealing noise from brakes - Seattle, Washington
This man by far is the best person I found on Your Mechanic! He is super down to Earth, very knowledgeable about vehicles, and just a super dope guy! By far the best experience I had with anyone working on my vehicle.

Joseph

20 years of experience
648 reviews
Joseph
20 years of experience
Honda Crosstour V6-3.5L - Spark Plugs - Salt Lake City, Utah
Helpful, friendly and timely. Goes above and beyond to make sure you’re good to go and answers any questions. Can’t say enough good things and quality of work is top notch! Already booked again. Thanks!

Steve

15 years of experience
150 reviews
Steve
15 years of experience
Honda Crosstour V6-3.5L - Pre-purchase Car Inspection - Yonkers, New York
Steve is the best you can get with or without a prescription. His assessment was spot on, concise and he made me feel as though I did the inspection myself. I went to the deal with my knowledge and bargaining chip proud. If you get Steve, you’re in good hands. Thanks again. JB

Excellent Rating

(47)

Rating Summary
47
0
0
0
0
47
0
0
0
0
Number of Honda Crosstour services completed
517+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

P0296 OBD-II Trouble Code: Cylinder 12 Contribution/Balance Fault
P0296 P0296 code definition The P0296 code means that the PCM detects that the voltage reading for the fuel injector circuit in cylinder 12 does not align with the manufacturer’s specifications. What the P0296 code means Part of the fuel...
10 Best Stores to Buy Auto Parts in Nashville, Tennessee
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Nashville is AutoZone.
How to Replace a Windshield Washer Reservoir
Car windshield washer reservoirs hold washer fluid for cleaning the windshield. If the reservoir is dry it can crack or break and need to be replaced.

Code p0128

Code P0128 (https://www.yourmechanic.com/article/p0033-obd-ii-trouble-code-turbo-charger-or-supercharger-bypass-valve-control-circuit-by-john-nelson) is engaged specifically when the engine itself does not get to operating temperature in a specified time period. The only things that can cause this problem is an issue with the thermostat (https://www.yourmechanic.com/services/thermostat-replacement), head temp sensor, and...

Drive shaft replacement

Hello. Replacing a driveshaft usually require replacement of the driveshaft itself and any bearings or couplings that go with it. Most driveshafts will have at least one center support bearing or flex coupler joint that should also be replaced at...

Car makes whining noise when I start in the morning

Hello, thank you for writing in. The vehicle will make noise when cold for several reasons. If you belts are loose at all, it may take them a while to warm up and grip the pulleys the way they are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com