Honda Accord Crosstour Windshield Washer Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(53)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(53)

Windshield Washer Pump Replacement Service

How much does a Windshield Washer Pump Replacement cost?

On average, the cost for a Honda Accord Crosstour Windshield Washer Pump Replacement is $155 with $60 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Honda Accord CrosstourV6-3.5LService typeWindshield Washer Pump - Rear ReplacementEstimate$235.95Shop/Dealer Price$276.19 - $374.41
2011 Honda Accord CrosstourV6-3.5LService typeWindshield Washer Pump - Rear ReplacementEstimate$215.95Shop/Dealer Price$256.21 - $354.44
2010 Honda Accord CrosstourV6-3.5LService typeWindshield Washer Pump - Front ReplacementEstimate$215.95Shop/Dealer Price$256.21 - $354.44
2011 Honda Accord CrosstourV6-3.5LService typeWindshield Washer Pump - Front ReplacementEstimate$215.95Shop/Dealer Price$256.19 - $354.40
Show example Honda Accord Crosstour Windshield Washer Pump Replacement prices

What is the Windshield Washer Pump all about?

The windshield washer pump is a small electric water pump. When the washer pump is activated, it takes the washer fluid from the windshield washer reservoir and directs it to be sprayed through the washer jets onto the windshield. It is an electrical component that can fail over time. If you don't see any fluid coming out of the washer jets when you activate the windshield wiper switch, ask the mechanic to check the tubes for cracks and the nozzles for clogging.

Keep in mind:

Whenever the windshield washer pump is repaired or replaced, the entire windshield washing system should be inspected. It’s possible that the nozzles or the wiper switch are actually the cause of the problem.

How it's done:

  • Test operation of the wiper switch.
  • Make sure the nozzles are not clogged.
  • Test for power and ground at the washer pump.
  • Remove and replace the washer pump.
  • Test for proper operation of the washer system.

Our recommendation:

The windshield washing and wiping system is usually not inspected during routine maintenance. However, anytime a part of the windshield washing and wiping system is replaced or repaired, the windshield washer pump should be checked. If you notice that your vehicle is having a hard time spraying wiper fluid onto your windshield, you should schedule an inspection.

What common symptoms indicate you may need to replace the Windshield Washer Pump?

When the washer pump is activated, washer fluid doesn't spray on windshield.

How important is this service?

Your windshield washing system is designed to keep your windshield clean and your visibility high. When you pull the windshield washer switch on the steering column, the windshield washer pump is activated. The windshield washer pump is an electric water pump that pulls washer fluid from the windshield washer reservoir, and sends it to the washer jets, where it is sprayed onto the windshield through nozzles. This washer fluid acts as soap, and the windshield wiper blades then wipe it off. This process cleans your windshield of any dirt and debris that has accumulated on it.

When the windshield washer pump malfunctions, washer fluid will not be sent to the washer jets, and your vehicle will not be able to spray washer fluid onto the windshield. As a result, your visibility will decrease.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(53)

Rating Summary
50
3
0
0
0
50
3
0
0
0

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Honda Accord Crosstour V6-3.5L - Alternator - Houston, Texas
Early fast and knowledgeable

Kevin

17 years of experience
88 reviews
Kevin
17 years of experience
Honda Accord Crosstour V6-3.5L - Car is not starting - Merchantville, New Jersey
Kevin is a great mechanic!!!

Andrew

11 years of experience
337 reviews
Andrew
11 years of experience
Honda Accord Crosstour V6-3.5L - Spark Plug Replacement - Severn, Maryland
Andrew did an excellent job and my car's running well again. He was willing to answer my tech questions. I recommend him strongly.

David

18 years of experience
39 reviews
David
18 years of experience
Honda Accord Crosstour V6-3.5L - Timing Belt - Littleton, Colorado
Excellent

Excellent Rating

(53)

Rating Summary
50
3
0
0
0
50
3
0
0
0
Number of Honda Accord Crosstour services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1600+
experts on our platform

Recent articles & questions

Disabled Driver laws and Permits in Wisconsin
If If you live in the State of Wisconsin, and you have a disability, then you could be entitled to certain privileges and rights accorded to you by the Wisconsin Department of Transportation and Division of Motor Vehicles. Both organizations...
P2620 OBD-II Trouble Code: Throttle Position Output Circuit Open
P2620 P2620 code definition Throttle Position Output Circuit Open What the P2620 code means P2620 is an OBD-II code for the engine control module (ECM) detecting the throttle position closed output circuit is open and cannot detect a closed throttle....
How Much Does a Mechanic Make in Nebraska?
Automotive technician jobs in Nebraska have an average mechanic salary of $38k, while the national average is roughly $37k.

Possible electrical issue in a 2004 Honda Pilot

It appears that you are having multiple and intermittent issues with your Honda Pilot. Following the dealer's recommendations of replacing the gear shifter cable will likely only solve one of your concerns. The issues you describe with your alarm may...

Engine will not turn over with FOB, electrical is working, but no dinging and starter doesn't click.

Hi there. Possibly when the switch was installed in line with the fan, the circuit now has too much resistance and the computer has cut out the ignition circuit to keep the engine from starting to prevent it from overheating...

Hi. My Chrysler [300c](/topics-300c/) had a flat [battery](/topics-battery-chrysler/). I have installed a new battery. The car started and then powered off. It did this about 3-4 times and now wont start at all.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com