GMC Yukon XL 1500 Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(260)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(260)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a GMC Yukon XL 1500 Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Yukon XL 1500V8-6.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$217.68Shop/Dealer Price$236.95 - $286.66
2009 GMC Yukon XL 1500V8-6.2LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$208.67Shop/Dealer Price$226.17 - $274.56
2004 GMC Yukon XL 1500V8-5.3LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2009 GMC Yukon XL 1500V8-5.3LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$208.67Shop/Dealer Price$226.20 - $274.60
2001 GMC Yukon XL 1500V8-6.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$187.57 - $213.02
2001 GMC Yukon XL 1500V8-6.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.24 - $210.69
2008 GMC Yukon XL 1500V8-6.2LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$208.67Shop/Dealer Price$226.21 - $274.63
2009 GMC Yukon XL 1500V8-5.3LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.20 - $274.60
Show example GMC Yukon XL 1500 Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(260)

Rating Summary
250
9
1
0
0
250
9
1
0
0

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
Yukon XL 1500 2004 - Oil/Fluid Leak - Lawrenceville, GA
Mark was great with explaining what was needed. And a professional with his service. Most recommended.

Christopher

5 years of experience
86 reviews
Christopher
5 years of experience
Yukon XL 1500 2007 - Battery - Tomball, TX
Great service!!!!

Andrian

30 years of experience
184 reviews
Andrian
30 years of experience
Yukon XL 1500 2004 - Car is slow to accelerate - Fort Lauderdale, FL
Very knowledgeable and friendly answered all my questions explained what's going on with vehicle thoroughly.

Dustin

6 years of experience
32 reviews
Dustin
6 years of experience
Yukon XL 1500 2011 - Oil Pressure Sensor - Spring, TX
Dustin completed the work and made sure the issue was resolved before leaving. I also appreciated the communication on arrival time. Thanks! Well done.

Excellent Rating

(260)

Rating Summary
250
9
1
0
0
250
9
1
0
0
Number of GMC Yukon XL 1500 services completed
2860+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Install a Steering Column
A steering column fails if it makes a clicking sound, it seems loose or rough when operating, or the steering tilt does not lock.
How to Become an Electric Car Mechanic
As electric cars become mainstream and alternative-fuel technology advances, there is a growing demand for mechanics qualified to work on them.
How to Replace an Air Spring
Air suspension systems have air springs that fail when the air compressor is always running and there excessive bouncing or even bottoming out.

How can i disable the anti theft system, the light keeps blinking?

Hi there. Aftermarket alarm systems can create problems, typically from poor installations. The vehicle's wiring harness is usually tapped into and removal of the alarm system is more than just pulling a fuse. Most aftermarket alarm systems are installed under...

I have 1988 oldsmobile cutlass ciera 2.8liter. I have had five mechanics check the car for a popping sound but they could not figure it out.

The popping sound from the engine sounds like the engine's timing is off or the fuel system is not delivering enough fuel to the engine. There could be a fuel injector (https://www.yourmechanic.com/services/fuel-injector-replacement) that maybe sticking and not spraying properly. The...

I have a pp171 code on my car

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com