GMC V2500 Suburban Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(37)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(37)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a GMC V2500 Suburban Power Steering Pump Replacement is $285 with $103 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC V2500 SuburbanV8-5.7LService typePower Steering Pump ReplacementEstimate$440.14Shop/Dealer Price$504.48 - $686.97
1990 GMC V2500 SuburbanV8-6.2L DieselService typePower Steering Pump ReplacementEstimate$428.43Shop/Dealer Price$490.47 - $671.24
1990 GMC V2500 SuburbanV8-5.7LService typePower Steering Pump ReplacementEstimate$428.43Shop/Dealer Price$490.50 - $671.30
1991 GMC V2500 SuburbanV8-6.2L DieselService typePower Steering Pump ReplacementEstimate$428.43Shop/Dealer Price$490.50 - $671.29
Show example GMC V2500 Suburban Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(37)

Rating Summary
35
1
0
1
0
35
1
0
1
0

David

43 years of experience
220 reviews
David
43 years of experience
GMC Yukon V8-6.0L - Power Steering Pump - Atlanta, Georgia
David was great - very thorough and honest. There was a problem with one of the replacement parts and he even came back on his own time to make sure the repair got done. I highly recommend David and will be using him for future service on my cars.

Aaron

11 years of experience
72 reviews
Aaron
11 years of experience
GMC Sierra 1500 V8-5.3L - Power Steering Pump - Cedar Park, Texas
Real good == I just wished we customers could add comments before booking since we are not able to diagnose issues ... I hope he comes back Wednesday to finish what we found is the real problem

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
GMC C1500 V8-5.0L - Power Steering Pump Replacement - Highland, California
Really good. Very satisfied

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
GMC Canyon L5-3.5L - Power Steering Pump - Kaysville, Utah
Prompt, efficient, convenient! Thanks

Excellent Rating

(37)

Rating Summary
35
1
0
1
0
35
1
0
1
0
Number of GMC Power Steering Pump Replacement services completed
407+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does a Brake Rotor/Disc Last?
Bringing Bringing your car to a stop is a vital part of staying safe while behind the wheel. Most car owners fail to realize just how many components have to work together in order for the braking system to work....
How to Calculate the Value of a Salvaged Car
An unfortunate part of driving is the possibility of a collision that’s severe enough to write off your car as a total loss. While the most important concern in any collision is the safety of all the involved parties, you’re...
How to Replace Struts
Whether Whether you have an extremely rough ride in your car, or the ride feels like you are floating on a cloud, you may need new struts (https://www.yourmechanic.com/article/what-is-a-strut). The suspension struts on your car are designed to control the oscillations,...

Car will not start.

Since you replaced some things already we can certainly rule those out. When you replaced the fuel pump did you replace the filter also? a clogged fuel filter can certainly make the car act this way. Also, considering the age...

Engine idle fluctuates and dies.

It sounds like you may have a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

My Nissan Altima 2011 SL, the slip indicator light stays on while I'm driving and the car won't go above 2-3 rpm. It will make lurching movements and slow itself down

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com