GMC V1500 Suburban Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a GMC V1500 Suburban Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC V1500 SuburbanV8-6.2L DieselService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1987 GMC V1500 SuburbanV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 GMC V1500 SuburbanV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 GMC V1500 SuburbanV8-6.2L DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1990 GMC V1500 SuburbanV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1991 GMC V1500 SuburbanV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 GMC V1500 SuburbanV8-6.2L DieselService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1988 GMC V1500 SuburbanV8-6.2L DieselService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC V1500 Suburban Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Richard

20 years of experience
126 reviews
Richard
20 years of experience
GMC V1500 Suburban V8-5.7L - Car is shaking or vibrating - Haltom City, Texas
Very professional seem honest.

Nolan

30 years of experience
206 reviews
Nolan
30 years of experience
GMC V1500 Suburban V8-5.7L - Power Steering Pump - Tucson, Arizona
Did a great clean up job from previous mechanic sent out. Thank you Nolan. Works great

Mark

25 years of experience
55 reviews
Mark
25 years of experience
GMC K1500 Suburban V8-5.7L - Windows - Glendale, Arizona
He arrived on time, as usual, and quickly fixed the window.

Vincent

21 years of experience
21 reviews
Vincent
21 years of experience
GMC K1500 Suburban V8-5.7L - Windows - Glendale, Arizona
Vincent was courteous, personable, and knowledgeable. He quickly went about his business and completed the repair.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of GMC Windows Inspection services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Is It Safe to Drive While Taking Stimulants?
Legal Legal stimulants range from drugs like, Ritalin and Dexamphetamine, to more commonly used substances like caffeine and nicotine. So, what are the effects? Are they safe to use when driving? It really depends on a number of factors –...
P0256 OBD-II Trouble Code: Injection Pump Fuel Metering Control "B" Malfunction (Cam/Rotor/Injector)
P0256 P0256 code definition The P0256 Trouble Code indicates injection pump fuel metering control “B” malfunction (cam/rotor/injector). What the P0256 code means When this code appears, it means that the powertrain control module has found that the signal voltage to...
How Much Does a Mechanic Make in Georgia?
Automotive technician jobs in Georgia have an mean salary of $38k, with some mechanics earning as much as $40k.

Radio’s touchscreen died, what’s the problem?

Your touch screen system has a recall, R40 dated 7/28/2015, that pertains to the radio system being susceptible to a security vulnerability. The vulnerability could allow someone to access the system which could cause problems. The dealer will reprogram your...

When I press my brake pedal I hear a whistle sound

Claimed by Kevin Gainer

I replaced wheel speed sensor. But abs and engine light still kn. What could it be

If the ABS wheel speed sensor was faulty, once the new hub/sensor is installed, and you drive the vehicle, the warning lights should go out. To determine what is going on, you can manually erase the trouble codes using an...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com