GMC Typhoon Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(98)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(98)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a GMC Typhoon Water Pump Replacement is $376 with $138 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 GMC TyphoonV6-4.3L TurboService typeWater Pump ReplacementEstimate$586.44Shop/Dealer Price$662.75 - $875.48
1992 GMC TyphoonV6-4.3L TurboService typeWater Pump ReplacementEstimate$524.62Shop/Dealer Price$596.85 - $806.52
Show example GMC Typhoon Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(98)

Rating Summary
97
0
0
0
1
97
0
0
0
1

James

32 years of experience
705 reviews
James
32 years of experience
GMC Typhoon V6-4.3L Turbo - Alternator - Newport Beach, California
good

Tyrone

10 years of experience
154 reviews
Tyrone
10 years of experience
GMC Yukon XL 1500 V8-5.3L - Water Pump - Los Angeles, California
water pump and radiator hose and other hoses replaced

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
GMC Envoy XUV L6-4.2L - Water Pump - Tampa, Florida
He made a complicated repair look easy, ,kept in touch before and during the repair. Very clean for a potentially messy job.

Rodric

15 years of experience
418 reviews
Rodric
15 years of experience
GMC Yukon V8-5.3L - Water Pump - Atlanta, Georgia
He was awesome, explained everything he was doing and what I needed done in the future. I fully recommend his services! Thank you Rodric!!!

Excellent Rating

(98)

Rating Summary
97
0
0
0
1
97
0
0
0
1
Number of GMC Water Pump Replacement services completed
1078+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Clean a Windshield Washer Nozzle
Car windshield washer nozzles spray washer fluid onto the car windshield. Clean washer jets if they become clogged or no longer work well.
How to Rent a 4WD Vehicle
Rental vehicle companies provide you with the option to choose different vehicles to suit your needs. Rental companies have fleets of vehicles that contain sub-compact through luxury full-size cars, compact through premium sport utility vehicles, pickup trucks, and passenger vans....
How Long Does a Glow Plug Last?
A A diesel engine is a very powerful and complicated piece of machinery. There are a variety of things that have to work together in order for the diesel engine to fire off and run as intended. Just like a...

what is the function of this LOCK PLATE , COLLAR NUT, BEARING RACE, SHIM X, output FLANGE?

The output flange is to connect the driveshaft or axle depending on the type of rear end you have. The lock plate holds in the bearing using a shim to pre-load the bearing into the race. The collar nut holds...

Engine noise at 60 mph

Hello, thanks for writing in about your Chevrolet 2014 Spark. The noise you are hearing could be an engine noise, such as a pulley going bad (https://www.yourmechanic.com/services/idler-pulley-replacement); or maybe a suspension noise, such as a grinding wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement). The...

Throttle position sensor - 1994 Ford F-150

Hello. The only thing to do is to verify that the TPS was installed in the correct position. Make sure you did not put the little blade on the throttle body behind instead of in front of the sensor blades....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com