GMC Sierra 3500 Classic Driveshaft Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,982)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,982)

Driveshaft Repair Service

How much does a Driveshaft Repair cost?

On average, the cost for a GMC Sierra 3500 Classic Driveshaft Repair is $762 with $667 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 3500 ClassicV8-6.0LService typeDriveshaft - Front ReplacementEstimate$1449.61Shop/Dealer Price$1793.27 - $2801.73
2007 GMC Sierra 3500 ClassicV8-6.6L Turbo DieselService typeDriveshaft - Front ReplacementEstimate$1429.61Shop/Dealer Price$1773.28 - $2781.76
2007 GMC Sierra 3500 ClassicV8-6.0LService typeDriveshaft - Rear ReplacementEstimate$1429.61Shop/Dealer Price$1773.28 - $2781.76
2007 GMC Sierra 3500 ClassicV8-6.6L Turbo DieselService typeDriveshaft - Rear ReplacementEstimate$1429.61Shop/Dealer Price$1773.26 - $2781.72
2007 GMC Sierra 3500 ClassicV8-8.1LService typeDriveshaft - Front ReplacementEstimate$1429.61Shop/Dealer Price$1773.30 - $2781.79
2007 GMC Sierra 3500 ClassicV8-8.1LService typeDriveshaft - Rear ReplacementEstimate$1429.61Shop/Dealer Price$1773.28 - $2781.76
Show example GMC Sierra 3500 Classic Driveshaft Repair prices

What is the Driveshaft all about?

The driveshaft transmits the power (torque) created by the engine to the front (front wheel-drive), rear (rear wheel-drive), or front and rear (four wheel-drive) of the vehicle as required. A 4WD vehicle may have two driveshafts.

Keep in mind:

  • A four wheel-drive vehicle may have two driveshafts, in which case you may only need one replaced.
  • A vehicle with modified height will run a greater risk of having a damaged driveshaft.
  • When your driveshaft is replaced, all other components should be checked for quality, and the U-joints should be properly lubricated.
  • In some vehicles, it is more straightforward and affordable to replace the entire driveshaft than to replace a single component.

How it's done:

  • Remove and replace drive shaft.
  • Perform basic safety inspection.
  • Test drive the vehicle.

Our recommendation:

When applicable, make sure all U-joints are lubricated during a major service. This will extend the life of your driveshaft.

What common symptoms indicate you may need to replace the Driveshaft?

  • A clunking noise when you accelerate or shift between drive and reverse.
  • Vibration when driving.
  • Squeaking noise while driving.

How important is this service?

A driveshaft is responsible for transferring power from a vehicle’s transmission to its wheels. The driveshaft receives the torque from the transmission, and uses it to turn the wheels. As the driveshaft gets damaged, it doesn’t do its job as well, which puts undue pressure on other parts of the vehicle, which can cause damage. When the driveshaft ceases working entirely, the vehicle won’t be able to send power to the wheels, and you won’t be able to drive.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,982)

Rating Summary
2,822
79
21
10
50
2,822
79
21
10
50

Gabriel

13 years of experience
39 reviews
Gabriel
13 years of experience
GMC Sierra 3500 Classic V8-6.6L Turbo Diesel - Center Support Bearing - Colorado Springs, Colorado
Great service! Made sure the job was done and done right!

William

34 years of experience
555 reviews
William
34 years of experience
GMC Sierra 2500 HD V8-6.0L - Driveshaft Replacement (Front, Rear) - Phoenix, Arizona
I'm one step closer to getting my truck done

Isai

27 years of experience
230 reviews
Isai
27 years of experience
GMC C2500 V8-7.4L - Car is not starting - San Antonio, Texas
Isai was extreemly knowledgable and willing to share his insights. He was also extreemly professional and promt.

TJ

26 years of experience
362 reviews
TJ
26 years of experience
GMC Canyon L5-3.5L - Tie Rod End Replacement (Front Right Outer) - North Port, Florida
TJ is great! Prompt and very pleasant to deal with. My truck needed an outer tie rod and I found YourMechanic online. Booked an appointment and found out TJ was my tech. I received a text a little while before my appointment from TJ stating he was on his way. I went out and spoke with him briefly about the issues and he said he would get started. Changing the tie rod was a breeze for TJ and he also inspected the truck. I highly recommend TJ!

Excellent Rating

(2,982)

Rating Summary
2,822
79
21
10
50
2,822
79
21
10
50
Number of GMC services completed
32802+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Distracted Driving
The The vehicle in front of you is weaving back and forth, speeding up, slowing down and even edging over into oncoming traffic. Since it’s only 9 am, you might be wondering how anyone could be drinking already. The truth...
P2443 OBD-II Trouble Code: Secondary Air Injection System Switching Valve Stuck Closed Bank 2
P2443 P2443 code definition Secondary Air Injection System Switching Valve Stuck Closed Bank 2 What the P2443 code means P2443 is an OBD-II generic code for the engine control module (ECM) detecting the exhaust pressure sensor is detecting no exhaust...
How to Troubleshoot a Parking Brake or Emergency Brake That Won't Engage
Emergency brakes won't engage if the parking brake lever or pedal is out of adjustment or there are worn brake shoes or brake pads.

No heat - 2000 Dodge Dakota

Hello there, many common faults will cause your 2000 Dodge Dakota to not have heat. If you have no heat coming from the vents, it is likely you have a air conditioning blend door actuator fault or a faulty AC...

Check engine light flashed 10 times then went off when car was started

Generally, the check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) comes on when something fairly serious is going on with the vehicle. This can happen for many different reasons such as a faulty mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), a faulty O2 sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement), a...

Have a coolant leak thought was fix now car temp in tha red

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com