GMC Sierra 3500 Classic Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(30)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(30)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a GMC Sierra 3500 Classic Fuel Pump Replacement is $787 with $409 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 3500 ClassicV8-6.0LService typeFuel Pump ReplacementEstimate$1235.68Shop/Dealer Price$1449.70 - $2069.87
2007 GMC Sierra 3500 ClassicV8-8.1LService typeFuel Pump ReplacementEstimate$1211.35Shop/Dealer Price$1420.60 - $2037.20
Show example GMC Sierra 3500 Classic Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(30)

Rating Summary
27
1
0
1
1
27
1
0
1
1

Gabriel

14 years of experience
39 reviews
Gabriel
14 years of experience
GMC Sierra 3500 Classic V8-6.6L Turbo Diesel - Center Support Bearing - Colorado Springs, Colorado
Great service! Made sure the job was done and done right!

Adrian

10 years of experience
28 reviews
Adrian
10 years of experience
GMC Acadia V6-3.6L - Fuel Pump - Germantown, Maryland
Adrian was prompt, professional and efficient! I'm very happy with his work!

TJ

27 years of experience
362 reviews
TJ
27 years of experience
GMC Safari V6-4.3L - Fuel Pump - Sarasota, Florida
Quality Service A++++

Kwante

13 years of experience
65 reviews
Kwante
13 years of experience
GMC Sierra 1500 V8-4.8L - Fuel Pump - Baltimore, Maryland
Kwante showed up on time and was very nice to work with. I would highly recommend him and will request him for all my vehicle repairs in the future. thank you, bob w.

Excellent Rating

(30)

Rating Summary
27
1
0
1
1
27
1
0
1
1
Number of GMC Fuel Pump Replacement services completed
330+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0255 OBD-II Trouble Code: Injection Pump Fuel Metering Control “A” Intermittent (Cam/Rotor/Injector)
P0255 P0255 code definition The P0255 OBD-II Trouble Code refers to a problem with the injection pump fuel metering control “A” intermittent (cam/rotor/injector). What the P0255 code means The powertrain control module has found an issue with the signal voltage...
Windshield Laws in Ohio
If If you drive a vehicle on the roadways in Ohio, you already know about the numerous traffic laws you are required to follow for safety. In addition to those rules, Ohio also has regulations in place to ensure your...
How to Register a Car in Massachusetts
If If you are planning a move to the great state of Massachusetts, then you will need to make sure that you have all of your bases covered. Among the most important things that you will have to do when...

Blue smoke black smoke white smoke what do they mean

Hello. If there is blueish smoke coming from the exhaust, then that is an indication that the engine is burning oil (https://www.yourmechanic.com/article/What-Does-It-Mean-When-My-Car-Is-Burning-Oil_3). This can come from the valve stem seals or from the piston rings. It can also come from...

Why is my car overheating?

Hi there, thanks for writing in. I'd be happy to help. The cooling fan in your car is electric. It is triggered by a relay and temperature sensor. If equipped with air conditioning, turn it on and see if the...

While driving my 2005 Chevy Duramax a check [engine](/topics-engine-chevy/) light came on and a code read of p2563. I have looked into what it means and was wondering is it dangerous or bad to continue to drive it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com