GMC Sierra 1500 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(376)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(376)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a GMC Sierra 1500 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* GMC Sierra 1500L6-3.0L Turbo DieselService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 GMC Sierra 1500V6-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 GMC Sierra 1500V8-4.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 GMC Sierra 1500V8-6.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2016 GMC Sierra 1500V8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 GMC Sierra 1500V8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 GMC Sierra 1500L4-2.7L TurboService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2006 GMC Sierra 1500V8-4.8LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC Sierra 1500 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(376)

Rating Summary
347
14
6
1
8
347
14
6
1
8

Pete

23 years of experience
31 reviews
Pete
23 years of experience
GMC Sierra 1500 V6-4.3L - Crankshaft Position Sensor - Bradenton, Florida
Pete was very helpful. Very handy having onsite service. A + + + +

Brandon

20 years of experience
773 reviews
Brandon
20 years of experience
GMC Sierra 1500 V8-4.8L - Brake Light Switch Replacement - Oviedo, Florida
Brandon was courteous and professional. He was early for the appointment. He explained what he was doing and showed me the parts before and after replacement. Will definitely be calling again.

Joe

43 years of experience
821 reviews
Joe
43 years of experience
GMC Sierra 1500 V6-4.3L - Car is hard to start - Tampa, Florida
Very nice person And knows what he is doing.

John

27 years of experience
1019 reviews
John
27 years of experience
GMC Sierra 1500 V6-4.3L - Serpentine/Drive Belt - Houston, Texas
Great Fast Service.

Excellent Rating

(376)

Rating Summary
347
14
6
1
8
347
14
6
1
8
Number of GMC Sierra 1500 services completed
4136+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
The Guide to Right-of-Way Laws in Colorado
Right-of-way Right-of-way laws are in place to ensure that if there are no traffic signs or signals, there are still rules in place that govern who goes first. These rules are based in courtesy and common sense, and work to...
How to Do a Compression Test
A compression test diagnoses many engine problems. If a compression test is below the manufacturer's specifications, there's an internal engine issue.

car is misfiring and vibrating

In older, points-style distributor systems, the spark plugs and ignition coils were the primary source of engine stumbling and hesitation. However, in newer, electronic ignition systems like your 2011 Versa, the primary source is either bad sensors or clogged fuel...

Can you give me an idea of the cost of repairing my 2008 Chrysler Sebring convertible?

Good afternoon Sybil. Thank you for continuing to ask questions. The more you know about the issues with your car, the better informed you will be to make good decisions about repairs The Manifold Tuning Valve for your Sebring can...

2001 BMW 740il fuel pump replacement

If the pump has failed, depending on the failure mode of the pump, you can diagnose the fuel pump yourself. Turn the key to the ignition (run) position. At that instant, you should hear a momentary whirring noise from the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com