GMC Sierra 1500 Limited Squealing noise when steering wheel is turned Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,958)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,958)

Squealing noise when steering wheel is turned Inspection Service

How much does a Squealing noise when steering wheel is turned Inspection cost?

On average, the cost for a GMC Sierra 1500 Limited Squealing noise when steering wheel is turned Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 GMC Sierra 1500 LimitedV8-5.3LService typeSquealing noise when steering wheel is turned InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example GMC Sierra 1500 Limited Squealing noise when steering wheel is turned Inspection prices

In most modern cars, power steering helps the driver turn the steering wheel and control the front wheels more easily. A failure by the power steering unit is sometimes indicated by a squealing noise made when the driver turns the steering wheel. The squealing noise could be coming from the power steering pump or from the belt that powers the power steering from the engine.

How this system works:

Power steering makes the job of controlling the wheels easier by using either hydraulic or electric actuators. On hydraulic systems, a belt connected to the engine powers a hydraulic pump. As the driver turns the steering wheel the pump sends fluid to a cylinder which assists the driver turn the wheel. Electronic systems, which are becoming more common in new vehicles, use small electric motors to help turn the wheels. When your power steering fails, it can be very difficult to manipulate the steering wheel, especially at low speeds.

Common reasons for this to happen:

  • Low Power Steering Fluid: If you hear a squealing noise while turning the steering wheel, it may be an indication that the power steering fluid is low. Fluid may become low because of a leak. You can check under the engine for leaks by looking for red or pink liquid, the typical color of most power steering fluids.

  • Worn Out Belt: Power steering may be affected by a worn belt, causing a squealing noise when the steering wheel is turned. When a belt becomes worn, it can slip, affecting the fluid pressure created by the power steering pump. If the belt snaps completely, the power steering pump will fail to operate, making the steering very heavy.

  • Failing Power Steering Pump: If the power steering pump begins to fail you may notice some squealing when turning the wheel. When seals and other parts of the power steering pump begin to wear down, the pump cannot maintain a consistent level of fluid pressure. Worn out pumps will eventually fail over time, causing the power steering to stop working altogether and making the steering very heavy.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the squeaking noise and determine which power steering component has failed or is failing. The mechanic will then provide a detailed inspection report outlining the nature of the component and the cost of any necessary repairs.

How it's done:

A mechanic will inspect your vehicle by opening the hood and inspecting the engine bay for signs of failure to the power steering pump or belt. He or she will start by checking the level of the power steering fluid. If it is low, the mechanic will refill it. The mechanic will also be checking for leaks, making sure that consistent pressure is maintained throughout the power steering system. If the belt is worn or broken, the mechanic will install a new one and make sure it works well with the existing power steering pump. If the pump has failed, the mechanic will replace whichever component has failed, but may need to replace it entirely. Before leaving, the mechanic will test the steering to make that the fluid pressure is consistent and that the wheel is easy to turn.

How important is this service?

A complete power steering failure while driving can be very dangerous and unexpected for even the most experienced drivers. Being diligent can save you the trouble and potential danger of a complete power steering failure. When power steering components are about to fail, they typically warn drivers with unusual noises like a squeak when the wheel is turned. If you notice a squeak when turning the steering wheel, you should have a mechanic inspect you power steering components.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,958)

Rating Summary
2,798
79
21
10
50
2,798
79
21
10
50

John

27 years of experience
1019 reviews
John
27 years of experience
GMC Canyon L4-2.8L - Water Pump - Seabrook, Texas
Highly satisfactory

Robert

22 years of experience
290 reviews
Robert
22 years of experience
GMC Yukon V8-6.2L - Oil Change - Flower Mound, Texas
Robert was prompt, efficient and great to deal with! Will be requesting him again on future work.

Enrique

21 years of experience
244 reviews
Enrique
21 years of experience
GMC Safari V6-4.3L - Spark Plugs - Kissimmee, Florida
A very professional person.very polite a person that answer all my concerns about my car and until now everything is fine.thank you.

Mack

22 years of experience
114 reviews
Mack
22 years of experience
GMC Yukon V8-6.0L - Valve Cover Gasket - Weatherford, Texas
Very knowledgeable mechanic also informative. Overall Professional guy. Would Highly recommend him.

Excellent Rating

(2,958)

Rating Summary
2,798
79
21
10
50
2,798
79
21
10
50
Number of GMC services completed
32538+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Tell If an Air Filter Is Good Quality
Considering Considering that your car’s engine needs 10,000 to 12,000 gallons of air to burn one gallon of gasoline, you need an air filter that will allow only clean air reaches its internal combustion chamber. As you drive, road debris,...
Is it Safe to Drive With a Bad Axle?
The axles transmit power from either the transmission or the differential to the drive wheels on your car. If one of your...
Child Seat Safety Laws in Hawaii
Hawaii, Hawaii, like other states, has regulations in place for seat belts, and other security. Adults are expected to use their seat belts, and they are also expected to look after children who occupy their motor vehicles. Children cannot be...

All dash lights and headlights work, but car won't start.

The starter signal goes through the ignition switch through the clutch switch or automatic shift position sensor then it gets passed to the starter relay. The starter relay controls the starter. My recommendation is to have the system checked (https://www.yourmechanic.com/services/car-is-not-starting-inspection)...

Recommendation about welding truck floor pans

It used to be very expensive to get a really good welding machine. I use one of these Mig welders that use an inert gas. I bought a decent one for about 400 dollars. They are really good for welding...

My 2000 Ford Expedition Eddie Buer 5.4L is stalling and engine dies when I go to brake. Before when I would brake the engine rpm would go up.

Hi there. What is happening is there is a vacuum leak that is present during the braking time. The brake booster either has a vacuum valve leaking or a diaphragm leaking. When stepping on the brakes, the vacuum drops causing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com