GMC Sierra 1500 HD Classic Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Classic Control Arm Assembly Replacement is $301 with $161 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1025.42Shop/Dealer Price$1246.63 - $1902.14
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$657.24Shop/Dealer Price$741.82 - $986.08
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1016.41Shop/Dealer Price$1235.87 - $1890.08
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1016.41Shop/Dealer Price$1235.87 - $1890.08
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$690.51Shop/Dealer Price$829.97 - $1240.86
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1016.41Shop/Dealer Price$1236.01 - $1890.33
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$657.24Shop/Dealer Price$741.91 - $986.24
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$690.51Shop/Dealer Price$828.50 - $1238.28
Show example GMC Sierra 1500 HD Classic Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0

Brian

24 years of experience
818 reviews
Brian
24 years of experience
GMC Envoy L6-4.2L - Control Arm Assembly Replacement (Rear Upper Left, Rear Upper Right) - Jacksonville, Florida
Brian did a terrific job. He has tremendous knowledge and is a great communicator. Honest mechanic. Will recommend.

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
GMC Terrain L4-2.4L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Marietta, Georgia
Tinashes work was above and beyond. Thank you so much.

Michael

26 years of experience
187 reviews
Michael
26 years of experience
GMC Envoy L6-4.2L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Las Vegas, Nevada
Michael did a great job. On time and knew what he was doing.

Tony

16 years of experience
280 reviews
Tony
16 years of experience
GMC Envoy XL V8-5.3L - Control Arm Assembly Replacement (Front Upper Right) - Fairburn, Georgia
Tony was courteous and professional

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0
Number of GMC Control Arm Assembly Replacement services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Buy a Porsche Cayenne
The Porsche Cayenne is one of the premier luxury SUVs available on the market today. It is a rare combination of performance and luxury, with dashing good looks thrown in for good measure, and critics and drivers alike praise it...
Why Do Cars Have Different Oil Change Intervals?
Car oil change intervals depend on the make, model, and year of the car. The correct type of oil and how the vehicle is used makes a difference too.
Ohio Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Ohio. Speed limits in Ohio Ohio is the only state east of the Mississippi that permits a 70...

BMW vs. Mercedes Benz

Those are both high-end, high-maintenace, over-engineered German cars. They have horrendous re-sell value, because they cost so much money to fix and they break down when they are older all of the time. That said, if I had a choice,...

Battery dies after jump start after turning key off. Battery? Alternator? No dimming lights no dashboard dimming. Battery maybe?

Hello. If the vehicle is running fine as you drive around then the alternator should be fine. This is usually caused by a bad battery (https://www.yourmechanic.com/services/battery-replacement). It sounds like it is accepting a jump but it is not accepting charge...

I own a 2000 mercury sable LS DOHC and yesterday I changed my cyclinder 3 coil and my car ran better then ever but I went to start

Hello. There are 2 likely sources of the white smoke - which is engine coolant getting into the exhaust system. The lower intake manifold gasket can leak coolant into the air intake and a blown headgasket - common on these...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com