GMC Sierra 1500 HD Classic Brake Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Brake Hose Replacement Service

How much does a Brake Hose Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Classic Brake Hose Replacement is $248 with $60 for parts and $189 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$349.84Shop/Dealer Price$396.18 - $501.17
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeBrake Hose - Passenger Side Front ReplacementEstimate$308.00Shop/Dealer Price$352.91 - $453.54
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeBrake Hose - Driver Side Front ReplacementEstimate$308.00Shop/Dealer Price$352.91 - $453.54
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeBrake Hose - Driver Side Rear ReplacementEstimate$313.84Shop/Dealer Price$360.17 - $465.15
Show example GMC Sierra 1500 HD Classic Brake Hose Replacement prices

What is the brake hose and how does it work?

The hydraulic steel brake lines that carry brake fluid in your car are bolted to the frame of the vehicle. These metal brake lines must eventually attach to the individual wheel calipers — or wheel cylinders in the case of drum brakes — at all four wheels. Since the wheels constantly move up and down, or left and right in the case of the front wheels, the brake line that attaches to the individual wheel calipers must be highly flexible. Enter the brake hose: a flexible, synthetic, reinforced-rubber hose designed to withstand the 1,000 PSI plus pressures that occur when you apply the brakes. There is at least one brake hose at each wheel position, and sometimes two depending on the suspension design. At the end of each rubber hose are steel connections with seals to maintain a leak-proof connection.

Brake Hoses

When to consider replacing the brake hose:

  • Physical damage. If there are cuts, cracks, abrasions, bulging, or excessive rust at the hose fitting ends, the hose should be replaced.
  • Leaks. Seepage at hose fittings, or leaks anywhere along the hose, requires replacement. If there is a leak, or the hose is bulging, you may notice that the brake pedal is lower than usual or spongy.
  • Internal hose failure. Occasionally, the lining on the interior of the hose can separate, blocking the flow of hydraulic fluid. This is diagnosed using test gauges. A fluid blockage that prevents the brakes from releasing may manifest itself as dragging brakes or overheated brakes.
  • End of Lifetime. Although many brake hoses can last 20 plus years if well-made out of quality materials, after 10 years of service it is best to replace the hoses with new ones for maximum reliability and safety.

How do mechanics replace the brake hose?

  • The vehicle is jacked up and safely supported with steel jack stands.
  • The wheel and tire assembly are removed.
  • A pan is put in place to catch brake fluid.
  • Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.
  • Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.
  • The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.
  • Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.

Is it safe to drive with a brake hose problem?

No. Properly working brakes are always essential. If you suspect damage to the brake hoses or see leaks it is a good idea to have a professional evaluate your car’s brakes.

When replacing a brake hose keep in mind:

  • If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.
  • Some vehicles have flexible, braided stainless steel brake hoses, or other specially designed hoses. If your car does not have ordinary synthetic rubber hoses, a mechanic will let you know what type of new brake hose you have and what your replacement options are.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1

Brandyn

14 years of experience
61 reviews
Brandyn
14 years of experience
GMC C1500 V6-4.3L - Brake Hose Replacement (Driver Side Front) - Raleigh, North Carolina
Awesome

Diego

21 years of experience
564 reviews
Diego
21 years of experience
GMC Yukon V8-5.3L - Brake Hose Replacement (Driver Side Front) - Laveen, Arizona
Excellent!!!!!!

Desmond

20 years of experience
51 reviews
Desmond
20 years of experience
GMC Yukon V8-6.2L - Brake Hose Replacement (Passenger Side Front) - Seaside, California
Desmond was super helpful and efficient. He went above and beyond to show me what was wrong and how he fixed it! He was very professional and great at his job. I would recommend me to any and everyone.

Richard

20 years of experience
27 reviews
Richard
20 years of experience
GMC K1500 Suburban V8-5.7L - Brake Hose Replacement (Driver Side Front, Passenger Side Front) - Garden Grove, California
He was very friendly and professional. Did a great job.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1
Number of GMC Brake Hose Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Ballast Resistor
Common signs are the vehicle not starting or starting but immediately dying. Only a professional mechanic should handle the ballast resistor.
How Long Does an Exhaust Pressure Control Valve Last?
The The exhaust pressure control valve is used in diesel vehicles as part of its EGR (exhaust gas recirculation) system. The EGR system is meant to bring down the amount of emissions that vehicles produce, as the gas that is...
10 Best Stores to Buy Auto Parts in Los Angeles, California
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Los Angeles is AutoZone.

My car won't stat,dead battery expected the battery's fully charged?

Hey, thanks for writing in about your 2003 Cadillac CTS. It certainly sounds like your battery is the issue. It is possible for it to take a charge and have voltage but not have the capacity to start your vehicle....

White smoke coming from tailpipe with the code for evap large leak.

Hi there. The white smoke coming from the exhaust system indicates that there is water (coolant) in the exhaust system. This is caused by the coolant getting into the combustion chamber and burning off with the fuel. The coolant is...

My 2009 Nissan Altima feels as if it is vibrating when at stoplight occasionally. What could be the cause?

It could be that one or more motor mounts is getting tired. The Motor mounts are rubber to metal brackets, some of them have fluid capsules and they keep the engine in place while isolating the car from the normal...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com