GMC K1500 Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(40)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(40)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a GMC K1500 Brake Vacuum Pump Replacement is $318 with $223 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 GMC K1500V8-5.0LService typeBrake Vacuum Pump ReplacementEstimate$764.17Shop/Dealer Price$936.47 - $1430.85
1983 GMC K1500V8-5.7LService typeBrake Vacuum Pump ReplacementEstimate$541.31Shop/Dealer Price$662.91 - $1005.16
1999 GMC K1500V8-5.7LService typeBrake Vacuum Pump ReplacementEstimate$541.31Shop/Dealer Price$662.91 - $1005.16
1980 GMC K1500L6-4.1LService typeBrake Vacuum Pump ReplacementEstimate$550.81Shop/Dealer Price$673.38 - $1016.37
1984 GMC K1500V8-6.2L DieselService typeBrake Vacuum Pump ReplacementEstimate$550.81Shop/Dealer Price$673.43 - $1016.44
1997 GMC K1500V6-4.3LService typeBrake Vacuum Pump ReplacementEstimate$693.85Shop/Dealer Price$853.58 - $1310.24
1993 GMC K1500V8-5.7LService typeBrake Vacuum Pump ReplacementEstimate$685.15Shop/Dealer Price$841.32 - $1287.60
1997 GMC K1500V8-5.0LService typeBrake Vacuum Pump ReplacementEstimate$698.85Shop/Dealer Price$858.82 - $1315.66
Show example GMC K1500 Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(40)

Rating Summary
39
1
0
0
0
39
1
0
0
0

Raul

34 years of experience
285 reviews
Raul
34 years of experience
GMC K1500 V8-5.7L - Brake Pads Replacement (Rear) - Union City, California
Excellent service!!

Scott

34 years of experience
551 reviews
Scott
34 years of experience
GMC K1500 V8-5.0L - Water Pump - Broomfield, Colorado
This was my first experience with Your Mechanic. Scott went right to work. He took the time to explain what was going on and communicated with me throughout the process. Very pleased. Will keep Scott in mind for future services.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
GMC K1500 V6-4.3L - Door does not lock or open - Tucson, Arizona
Very proficient and prompt. Got me back on the road very quickly.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
GMC K1500 V6-4.3L - Fuel Filter - Tucson, Arizona
He handled a tough job with great professionalism. Will ask for Ramon on future projects.

Excellent Rating

(40)

Rating Summary
39
1
0
0
0
39
1
0
0
0
Number of GMC K1500 services completed
440+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Car Suspension Systems Work
On the surface it appears the suspension of a car has a pretty straightforward job. If the bumps end up being...
How to Diagnose a Cooling System Problem
You may be driving down the road or sitting at a stop light when you first notice the temperature gauge in your...
P0522 OBD-II Trouble Code: Engine Oil Pressure Sensor/Switch Low Voltage
P0522 code means the sensor is indicating too low of an oil pressure value due to faulty sensor, low oil, or sensor circuit.

Slave cylinder for clutch

The clutch slave cylinder is external outside the transmission. It can be replaced without removing the transmission.

Dose a chevy cruze thermostat open with the sensor ontop of the houseing or is it suppose to open just with hot water at 200degree

Hi there. Actually, on modern cars, the thermostat is opened through the interaction of both the sensor and the actual temperature reading on the thermostat. Both components relay information to the ECU which activates control of the thermostat. This is...

Chevy impala 06 07

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com