GMC Canyon Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(59)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(59)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a GMC Canyon Throttle Body Replacement is $454 with $314 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC CanyonL4-2.9LService typeThrottle Body ReplacementEstimate$1145.56Shop/Dealer Price$1396.80 - $2142.42
2008 GMC CanyonL5-3.7LService typeThrottle Body ReplacementEstimate$779.49Shop/Dealer Price$939.70 - $1416.20
2011 GMC CanyonL5-3.7LService typeThrottle Body ReplacementEstimate$779.49Shop/Dealer Price$939.72 - $1416.24
2004 GMC CanyonL5-3.5LService typeThrottle Body ReplacementEstimate$1279.81Shop/Dealer Price$1565.12 - $2416.88
2009 GMC CanyonL4-2.9LService typeThrottle Body ReplacementEstimate$774.91Shop/Dealer Price$935.47 - $1409.66
2012 GMC CanyonV8-5.3LService typeThrottle Body ReplacementEstimate$968.25Shop/Dealer Price$1175.81 - $1794.01
2011 GMC CanyonV8-5.3LService typeThrottle Body ReplacementEstimate$968.25Shop/Dealer Price$1175.69 - $1793.79
2011 GMC CanyonL4-2.9LService typeThrottle Body ReplacementEstimate$774.91Shop/Dealer Price$934.00 - $1407.08
Show example GMC Canyon Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(59)

Rating Summary
55
1
1
0
2
55
1
1
0
2

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
GMC Canyon L5-3.5L - Gears slipping when accelerating - Vancouver, Washington
Andrew took the time to do his best explaining everything. And worked hard to at least what's wrong with my truck when he realized the problem was not what he came to replace.

Sidney

15 years of experience
121 reviews
Sidney
15 years of experience
GMC Canyon L4-2.5L - Oil/Fluid Leak - Brighton, Colorado
Sidney was early to my appointment, he was prompt in getting to work, he resolve my problem quickly and smoothly. On top of his skill he’s kind and I enjoyed his attitude and personality.

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
GMC Canyon L5-3.7L - Serpentine/Drive Belt - Sacramento, California
Rodney is excellent...knows exactly how to fix a problem. I would highly recommend him. Came out here on a cold nite and put in my water pump. Just a good a decent man who knows how to fix car issues.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
GMC Canyon L5-3.7L - Car is not starting - Fremont, California
He did a great job, just like last time. Took the time to explain things and offered info on what I should do in the future, services, and tidbits...

Excellent Rating

(59)

Rating Summary
55
1
1
0
2
55
1
1
0
2
Number of GMC Canyon services completed
649+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Iowa
We We cannot always rely on traffic signals to tell us what to do. Often, we have to deal with unmarked intersections, and when that happens we have to know the right-of-way laws in order to ensure that we avoid...
Fuel Economy Myths
Drivers will try anything to get better gas mileage. Topping off your gas tank, ignoring tire pressure, and using premium gas won't improve your MPG.
What are the Car Pool Lane Rules in Maryland?
A A large percentage of Maryland drivers rely on the state’s major freeways when commuting to and from work, as well as while driving to school, the grocery store, and various other places. These drivers usually use the freeways on...

Engine burns oil on a '97 Integra

If it's running rich, it can easily flood the engine out and cause it to burn oil. So I would work on that first. But that said, realize that the only thing you are testing the engine compression is the...

My vehicle has problems when accelerating and it makes like some kind explosions.

You should have the fuel pressure checked first and then scan the computer for any codes and have them repaired as needed. The lack of power may be a low fuel pressure or clogged fuel filter problem (https://www.yourmechanic.com/services/fuel-filter-replacement). If these...

I was in a car accident with my 2014 Chevy cruze and I was hit on the rear driver side. My drivers rear tire's rim has a small dent.

Hi there. The light came on for the wheel is spinning on a different path than the reluctor ring can pick up on the wheel speed sensor. The wheel could be bent and causing the wheel hub to be bent...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com