GMC Canyon Driveshaft Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(52)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(52)

Driveshaft Repair Service

How much does a Driveshaft Repair cost?

On average, the cost for a GMC Canyon Driveshaft Repair is $630 with $535 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 GMC CanyonL5-3.7LService typeDriveshaft - Rear ReplacementEstimate$1184.29Shop/Dealer Price$1461.62 - $2271.09
2011 GMC CanyonL5-3.7LService typeDriveshaft - Front ReplacementEstimate$1164.29Shop/Dealer Price$1441.63 - $2251.12
2004 GMC CanyonL4-2.8LService typeDriveshaft - Rear ReplacementEstimate$1164.29Shop/Dealer Price$1441.63 - $2251.12
2005 GMC CanyonL5-3.5LService typeDriveshaft - Front ReplacementEstimate$1164.29Shop/Dealer Price$1441.61 - $2251.08
2004 GMC CanyonL5-3.5LService typeDriveshaft - Rear ReplacementEstimate$1164.29Shop/Dealer Price$1441.65 - $2251.15
2008 GMC CanyonL5-3.7LService typeDriveshaft - Rear ReplacementEstimate$1164.29Shop/Dealer Price$1441.63 - $2251.12
2006 GMC CanyonL5-3.5LService typeDriveshaft - Rear ReplacementEstimate$1169.29Shop/Dealer Price$1446.50 - $2255.88
2009 GMC CanyonL5-3.7LService typeDriveshaft - Rear ReplacementEstimate$1169.29Shop/Dealer Price$1446.87 - $2256.54
Show example GMC Canyon Driveshaft Repair prices

What is the Driveshaft all about?

The driveshaft transmits the power (torque) created by the engine to the front (front wheel-drive), rear (rear wheel-drive), or front and rear (four wheel-drive) of the vehicle as required. A 4WD vehicle may have two driveshafts.

Keep in mind:

  • A four wheel-drive vehicle may have two driveshafts, in which case you may only need one replaced.
  • A vehicle with modified height will run a greater risk of having a damaged driveshaft.
  • When your driveshaft is replaced, all other components should be checked for quality, and the U-joints should be properly lubricated.
  • In some vehicles, it is more straightforward and affordable to replace the entire driveshaft than to replace a single component.

How it's done:

  • Remove and replace drive shaft.
  • Perform basic safety inspection.
  • Test drive the vehicle.

Our recommendation:

When applicable, make sure all U-joints are lubricated during a major service. This will extend the life of your driveshaft.

What common symptoms indicate you may need to replace the Driveshaft?

  • A clunking noise when you accelerate or shift between drive and reverse.
  • Vibration when driving.
  • Squeaking noise while driving.

How important is this service?

A driveshaft is responsible for transferring power from a vehicle’s transmission to its wheels. The driveshaft receives the torque from the transmission, and uses it to turn the wheels. As the driveshaft gets damaged, it doesn’t do its job as well, which puts undue pressure on other parts of the vehicle, which can cause damage. When the driveshaft ceases working entirely, the vehicle won’t be able to send power to the wheels, and you won’t be able to drive.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(52)

Rating Summary
49
0
1
0
2
49
0
1
0
2

Angel

5 years of experience
118 reviews
Angel
5 years of experience
GMC Canyon L5-3.7L - Fuel Pump - Upper Marlboro, Maryland
Very knowledgeable, was on time, I found him to be very respectful, friendly and had a very easy going personality. I was very impressed. The work exceeded my expectations. I was very satisfied!

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
GMC Canyon L5-3.5L - Car is not starting - Lincoln, California
Very knowledgeable and friendly!!!!

Miguel

4 years of experience
5 reviews
Miguel
4 years of experience
GMC Canyon V6-3.6L - Differential Fluid Service Replacement (Front) - San Antonio, Texas
Quick work, clean work, very professional

Nathan

17 years of experience
278 reviews
Nathan
17 years of experience
GMC Canyon L5-3.5L - Water Pump - Austin, Texas
Great

Excellent Rating

(52)

Rating Summary
49
0
1
0
2
49
0
1
0
2
Number of GMC Canyon services completed
572+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does a Windshield Wiper Module Last?
Most Most of the modern cars on the market are equipped with a number of electronic components. Finding a way to keep up with them all is not nearly as easy as it sound. In order for these parts of...
P0690 OBD-II Trouble Code: ECM/PCM Power Relay Sense Circuit High
P0690 means a high voltage problem with the power supply to the ECM/PCM which may cause Check Engine Light to come on or the vehicle will not start.
How to Clean a Windshield Washer Nozzle
Car windshield washer nozzles spray washer fluid onto the car windshield. Clean washer jets if they become clogged or no longer work well.

How Do Fuel Injectors Get Dirty?

The gasoline we buy at our local gas station may look golden-clean but, in truth, by the time it reaches the fuel injector (https://www.yourmechanic.com/parts/fuel-injector), it has come into contact with impurities that will over time coat critical areas of the...

Can't get out of Park w/o manual release 2007 BMW 328

Hello - I would check your brake light switch (https://www.yourmechanic.com/article/how-long-does-a-brake-light-switch-last) and the fuse for the brake lights. If you have no brake lights, the brake switch has likely failed, preventing the shifter from leaving the Park position, without the manual...

Why would my engine start knocking a few days after an oil change in my 2001 Volkswagen Beetle

Hi there. It sounds like you may have a serious issue starting with the engine. I would check the level of the oil first. If it is very low then that may be the cause of the noise. If the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com