GMC C2500 Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a GMC C2500 Valve Cover Gasket Replacement is $167 with $27 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC C2500V8-6.2L DieselService typeValve Cover Gasket ReplacementEstimate$972.88Shop/Dealer Price$1057.93 - $1276.61
1998 GMC C2500V8-6.5L Turbo DieselService typeValve Cover Gasket ReplacementEstimate$1136.72Shop/Dealer Price$1216.38 - $1431.03
1992 GMC C2500V8-5.7LService typeValve Cover Gasket ReplacementEstimate$211.29Shop/Dealer Price$229.47 - $279.84
1993 GMC C2500V8-5.0LService typeValve Cover Gasket ReplacementEstimate$211.29Shop/Dealer Price$229.47 - $279.84
1998 GMC C2500V8-5.0LService typeValve Cover Gasket ReplacementEstimate$269.69Shop/Dealer Price$290.67 - $343.15
1994 GMC C2500V8-7.4LService typeValve Cover Gasket ReplacementEstimate$296.89Shop/Dealer Price$322.81 - $394.28
1995 GMC C2500V8-6.5L DieselService typeValve Cover Gasket ReplacementEstimate$462.43Shop/Dealer Price$543.41 - $782.15
1999 GMC C2500V8-5.0LService typeValve Cover Gasket ReplacementEstimate$269.69Shop/Dealer Price$288.61 - $339.54
Show example GMC C2500 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0

Chris

21 years of experience
448 reviews
Chris
21 years of experience
GMC C2500 V8-7.4L - Windshield Wiper/Washer System Inspection - Portland, Oregon
Helped me save some money by figuring out it was something else wrong with my truck. Good guy

Jose

18 years of experience
433 reviews
Jose
18 years of experience
GMC C2500 V8-5.7L - Oil Change - Portland, Oregon

Paul

34 years of experience
134 reviews
Paul
34 years of experience
GMC C2500 V8-5.7L - Fuel Injector - Middlesex, North Carolina
Once again professional service

Jose

18 years of experience
433 reviews
Jose
18 years of experience
GMC C2500 V8-5.7L - Car is stalling - Portland, Oregon

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0
Number of GMC C2500 services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P2262 OBD-II Trouble Code: Turbo Boost Pressure Not Detected - Mechanical
P2262 code definition Turbo Boost Pressure Not Detected-Mechanical What the P2262 code means P2262 is an OBD-II generic code. The engine control...
How to Buy a Good Quality Windshield
The The windshield in your vehicle protects you from the outside elements, as well as any debris that may fly in your way. It takes quite a beating in its lifetime, so it’s not unusual to chips, cracks, and even...
All About Snow Tires
Your Your knuckles are white as you grip the steering wheel - and it’s not only because it’s cold. The wind is blowing strong from the north, polishing the roads to a deceptively dull shine. You struggle to maintain control...

I'm hearing popping noises and rattles when I drive or go over pot holes

Hello. Unfortunately it sounds like you may have replaced some parts that may not have been needed. The most common cause of this noise on your vehicle is the front struts and the front stabilizer link pins. I start by...

can I swap a 96 accord vtec distributor for my 96 civic 1.6 non vtec distributor

Hi there. On the VTEC engine, there are several different electrical connections that would have to be upgraded in order for it to fit correctly. But, for the same year, I believe the motor mounts are in the same location...

Water pump leaking

Depending on the source of the leak, you may need to replace the entire water pump or just the water pump gasket. It sounds like you may have a water pump that may not be pumping correctly or may be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com