GMC C1500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(106)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(106)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a GMC C1500 Front Crankshaft Seal Replacement is $156 with $16 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 GMC C1500V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$198.20Shop/Dealer Price$212.60 - $247.70
1994 GMC C1500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$216.61 - $250.52
1995 GMC C1500V8-6.5L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$185.21Shop/Dealer Price$196.87 - $227.68
1994 GMC C1500V8-6.5L DieselService typeFront Crankshaft Seal ReplacementEstimate$185.21Shop/Dealer Price$196.87 - $227.68
1993 GMC C1500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$218.25 - $253.40
1998 GMC C1500V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$237.37Shop/Dealer Price$248.41 - $275.24
1993 GMC C1500V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$189.19Shop/Dealer Price$201.86 - $235.67
1996 GMC C1500V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$237.37Shop/Dealer Price$248.21 - $274.90
Show example GMC C1500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(106)

Rating Summary
100
4
0
1
1
100
4
0
1
1

Nathan

30 years of experience
260 reviews
Nathan
30 years of experience
GMC C1500 V8-5.7L - Serpentine/Drive Belt - Broken Arrow, Oklahoma
Great

Edmar

23 years of experience
246 reviews
Edmar
23 years of experience
GMC C1500 V6-4.3L - Car is not starting - Bedford, Texas
Edmar did a great job! He showed up on time and was very professional. He was able to fully check the ignition and fuel systems on my 1996 Chevrolet truck saving me time, money, and frustration. Highly recommend! I will not hesitate to use Edmar and Your Mechanic again.

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
GMC C1500 V8-5.7L - Alternator Repair - Statham, Georgia
Elias was on time, very nice, explained everything clearly, and very professional. Definitely would request him if needed again.

Brett

11 years of experience
197 reviews
Brett
11 years of experience
GMC C1500 V8-5.0L - Oil Change - Austin, Texas
Fantastic service and very friendly.

Excellent Rating

(106)

Rating Summary
100
4
0
1
1
100
4
0
1
1
Number of GMC C1500 services completed
1166+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Replace an Instrument Voltage Regulator
The instrument cluster has a voltage regulator that fails when the panel is dim or flickering, reads erratically, or is totally inoperable.
P0227 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch C Circuit Low Input
P0227 P0227 code definition Throttle/Pedal Position Sensor/Switch C Circuit Low Input What the P0227 code means P0227 is a generic OBD-II code indicating that the throttle/pedal position sensor/switch C circuit has a low input problem causing the sensor input to...
How to Buy Good Quality CV Joints
Your Your car’s axle must allow for the wheels to move around, bounce, and freely rotate. This action is facilitated by (CV) constant velocity joints. These unique couplings allow the tires to turn and move up and down in the...

How do I quickly heat the cabin of the vehicle?

If it is cold inside your car’s cabin, you can use the climate controls to quickly heat up the car. To heat the cabin quickly, follow these quick steps: 1. Use the fan control dial to set the fan speed...

Helicoil fell into spark plug well. what do I need to do to get it out. thank you.

There are only a couple things to try. One way is to use a magnet like you've already tried to get into the cylinder. I'm not sure what kind of magnet you used but you may have to use a...

Transmission hot idle engine what is the problem

Transmission fluid and condition can cause the transmission temperature to rise. The transmission relies on the fluid not only for hydraulic pressure to move the vehicle and change gears, but relies on it for cooling as well. Low fluid level...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com