GMC Acadia Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(315)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(315)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a GMC Acadia Wheel Stud Replacement is $177 with $82 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 GMC AcadiaV6-3.6LService typeWheel Stud - Passenger Side Front ReplacementEstimate$289.09Shop/Dealer Price$342.62 - $480.69
2007 GMC AcadiaV6-3.6LService typeWheel Stud - Passenger Side Front ReplacementEstimate$269.09Shop/Dealer Price$322.63 - $460.72
2011 GMC AcadiaV6-3.6LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$269.09Shop/Dealer Price$322.63 - $460.72
2014 GMC AcadiaV6-3.6LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$261.99Shop/Dealer Price$313.74 - $446.48
2011 GMC AcadiaV6-3.6LService typeWheel Stud - Driver Side Front ReplacementEstimate$269.09Shop/Dealer Price$322.65 - $460.75
2007 GMC AcadiaV6-3.6LService typeWheel Stud - Driver Side Rear ReplacementEstimate$269.09Shop/Dealer Price$322.63 - $460.72
2012 GMC AcadiaV6-3.6LService typeWheel Stud - Passenger Side Front ReplacementEstimate$274.09Shop/Dealer Price$327.50 - $465.48
2013 GMC AcadiaV6-3.6LService typeWheel Stud - Driver Side Rear ReplacementEstimate$266.99Shop/Dealer Price$318.99 - $451.94
Show example GMC Acadia Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(315)

Rating Summary
304
6
1
0
4
304
6
1
0
4

Mike

13 years of experience
176 reviews
Mike
13 years of experience
GMC Acadia V6-3.6L - Electric Problems - Durham, North Carolina
Very Professional and very knowledgeable.

Calvin

13 years of experience
22 reviews
Calvin
13 years of experience
GMC Acadia V6-3.6L - Headlight Bulb Replacement (Passenger Side Low Beam) - Broadview Heights, Ohio
On time, professional, knowledgeable and polite. Will definitely book again.

Chris

20 years of experience
448 reviews
Chris
20 years of experience
GMC Acadia V6-3.6L - Alternator - Vancouver, Washington
Fast and efficient

Kevin

24 years of experience
535 reviews
Kevin
24 years of experience
GMC Acadia V6-3.6L - Car is overheating - Stone Mountain, Georgia
Kevin was so polite' a good listener and experience man.

Excellent Rating

(315)

Rating Summary
304
6
1
0
4
304
6
1
0
4
Number of GMC Acadia services completed
3465+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Mercedes-Benz GL-Class
In In the world of full-size SUVs, Mercedes-Benz has made a name for themselves by offering unrivaled luxury in a field where the size of the engine is often the most important metric. While the 2012 Mercedes-Benz GL Class definitely...
The Best Tool to Eliminate Air Bubbles
Air bubbles can form while mechanics perform service on coolant systems. A vacuum coolant filler helps eliminate this problem to avoid serious damage.
How to Replace a Power Steering Belt
Common signs of a failing power steering belt include a squealing noise and visible cracks, cuts, or nicks on the serpentine or drive belt.

Transmission slipping

Normally when I hear this complaint I check the level of the transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) while the vehicle's engine is running and the transmission is in Park. While checking the level I would inspect the oil that came off the...

Service engine light flashes when accelerating and driving rough

This is a common sign of a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and...

Just replaced new timing solenoid sensor my car starts but won't idle

You need to make sure you are using the correct viscosity oil since too thick of oil will effect the solenoids and cam advance system. If correct oil is being used then you will need to have then cam shafts...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com