Geo Prizm Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(45)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(45)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Geo Prizm Front Crankshaft Seal Replacement is $1263 with $213 for parts and $1050 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Geo PrizmL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1646.38Shop/Dealer Price$1794.35 - $2177.51
1997 Geo PrizmL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1646.57Shop/Dealer Price$1798.23 - $2222.27
1995 Geo PrizmL4-1.8LService typeFront Crankshaft Seal ReplacementEstimate$1628.37Shop/Dealer Price$1775.67 - $2186.21
1993 Geo PrizmL4-1.8LService typeFront Crankshaft Seal ReplacementEstimate$1628.37Shop/Dealer Price$1775.66 - $2186.19
1997 Geo PrizmL4-1.8LService typeFront Crankshaft Seal ReplacementEstimate$1628.37Shop/Dealer Price$1786.71 - $2205.53
1996 Geo PrizmL4-1.8LService typeFront Crankshaft Seal ReplacementEstimate$1628.37Shop/Dealer Price$1776.71 - $2188.03
1993 Geo PrizmL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1646.57Shop/Dealer Price$1798.53 - $2222.80
1991 Geo PrizmL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1578.81Shop/Dealer Price$1713.71 - $2087.07
Show example Geo Prizm Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Geo mechanics

Real customer reviews from Geo owners like you.

Excellent Rating

(45)

Rating Summary
40
4
0
0
1
40
4
0
0
1

William

19 years of experience
90 reviews
William
19 years of experience
Geo Prizm L4-1.6L - Starter - Chicago, Illinois
William is a great guy. He was on time and knew what he was doing. After replacing a few things in my car myself, I knew I needed a new starter. William replaced the starter in my car, which was a hard job. He did a great job and my car started. I would definitely recommend William and will be using him again in the future.

Carlos

29 years of experience
601 reviews
Carlos
29 years of experience
Geo Prizm L4-1.6L - Squealing noise when steering wheel is turned - Mira Loma, California
I love dealing with Carlos. He is so respectful and attentive to what we need.

John

21 years of experience
650 reviews
John
21 years of experience
Geo Prizm L4-1.6L - Car Starter Repair - Orlando, Florida
Professional

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Geo Prizm L4-1.6L - Car is hard to start Inspection - Phoenix, Arizona
He was very nice, and got to the hearts of the problem really quickly.

Excellent Rating

(45)

Rating Summary
40
4
0
0
1
40
4
0
0
1
Number of Geo Prizm services completed
495+
services done by our mechanics
TOTAL NUMBER OF EXPERT Geo MECHANICS
70+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Ball Joint (Rear)
Common signs include clunking noises and tire wear in the rear. You might also start steering to the right or left unintentionally.
Rhode Island Parking Laws: Understanding the Basics
Drivers Drivers in Rhode Island need to be aware of the parking laws in their state and community. Failure to abide by the parking laws could mean fines, and it could mean your vehicle being towed to the impound yard....
How to Reset Automatic Windows
Technology Technology is great most of the time. It used to be that you could replace the battery in your vehicle and not have to worry. However, many modern cars will lose the automatic window function after battery replacement (https://www.yourmechanic.com/article/how-to-change-a-car-battery_2)....

Where's then cam sensor on a Dodge Caliber 2009

Hello there! You will find the camshaft position sensors mounted on the front and rear of the cylinder heads. If you need help with this, a certified technician from YourMechanic can come to your car's location to replace or install...

How do I remove a broken bolt out of thermostat housing

Hi there. If the bolt is sticking out, then you can use a pair of vice grips to help remove the bolt or weld on a nut. If the bolt is broke off inside the threaded gallery, then you will...

My car keeps jerking, almost like when a stick shift switches gears but I have an automatic 2012 Hyundai Sonata

Hello, thank you for writing in. The first possibility that comes to mind is the air intake sensors. Start by making sure idle air control valve, throttle, and EGR systems are all working well. These types of components can be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com