Ford Transit Connect Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford Transit Connect Power Steering Pressure Hose Replacement is $292 with $110 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Ford Transit ConnectL4-2.5LService typePower Steering Pressure Hose ReplacementEstimate$601.44Shop/Dealer Price$706.11 - $1009.57
2011 Ford Transit ConnectElectricService typePower Steering Pressure Hose ReplacementEstimate$906.96Shop/Dealer Price$1050.50 - $1471.24
2011 Ford Transit ConnectL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$906.96Shop/Dealer Price$1050.56 - $1471.34
2014 Ford Transit ConnectL4-1.6L TurboService typePower Steering Pressure Hose ReplacementEstimate$1027.29Shop/Dealer Price$1239.08 - $1869.01
2012 Ford Transit ConnectL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$906.96Shop/Dealer Price$1054.10 - $1477.53
2012 Ford Transit ConnectElectricService typePower Steering Pressure Hose ReplacementEstimate$906.96Shop/Dealer Price$1050.90 - $1471.93
2013 Ford Transit ConnectL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$906.96Shop/Dealer Price$1050.60 - $1471.41
2015 Ford Transit ConnectL4-1.6L TurboService typePower Steering Pressure Hose ReplacementEstimate$1027.29Shop/Dealer Price$1239.08 - $1869.01
Show example Ford Transit Connect Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(50)

Rating Summary
49
1
0
0
0
49
1
0
0
0

Jimmi

25 years of experience
156 reviews
Jimmi
25 years of experience
Transit Connect 2016 - Brake Pads - Winter Springs, FL
On time and performed the work requested. Everything is is perfect working order now thanks to him! Definitely great service

Derrick

5 years of experience
124 reviews
Derrick
5 years of experience
Transit Connect 2014 - Battery - Berkeley, CA
Not just on time but 5 actually 5 minutes early. Professional and fast. Highly recommended

Anthony

25 years of experience
96 reviews
Anthony
25 years of experience
Transit Connect 2013 - Radiator Hose - Islandia, NY
Excellent service

David

0 years of experience
736 reviews
David
0 years of experience
Transit Connect 2010 - Oil/Fluid Leak - Vallejo, CA
Great.

Excellent Rating

(50)

Rating Summary
49
1
0
0
0
49
1
0
0
0
Number of Ford Transit Connect services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P2652 OBD-II Trouble Code: B Rocker Arm Actuator System Stuck On Bank1
P2652 P2652 code definition B Rocker Arm Actuator System Stuck On Bank1 What the P2652 code means The Engine control module (ECM) has a wide variety of jobs, but one of the most critical is to keep the supply of...
New Hampshire Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of New Hampshire. Speed limits in New Hampshire 70 mph: I-93 from mile marker 45 mph to the Vermont...
A Buyer’s Guide to the 2012 Infiniti G37
The The 2012 Infiniti G37 is a sporty vehicle that looks as great as it performs. It’s a head turning vehicle that could be the perfect entry point to the luxury market for many people. Key Features The driver’s seat...

How do I use the hazard warning flashers?

The hazard warning flashers are a key safety feature. When you turn on the hazard warning flashers, the front and rear blinkers on both sides of the vehicle flash on and off. Any time that you are stopped in an...

96 Civic only starts with starter fluid

Yes, if it sat for many years, change the fuel filter. I would also drain the gas tank and put new fuel in it because, if it sat for many years, it's all going to be clogged up. Hope that...

My hazard lights come on when open my car door and my clock in my car blinks also and my hazard light stay blinking what is the pr

Hello, thank you for writing in. There are several reasons why the hazards might turn on when you open the door. Typically when you open the door the jamb switch which controls the connection to your radio and interior lights...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com