Ford Freestyle Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(92)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(92)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Ford Freestyle Mass Airflow Sensor Replacement is $225 with $130 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Ford FreestyleV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$375.07Shop/Dealer Price$450.09 - $652.65
2005 Ford FreestyleV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$355.07Shop/Dealer Price$430.11 - $632.68
2007 Ford FreestyleV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$355.07Shop/Dealer Price$430.11 - $632.68
Show example Ford Freestyle Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(92)

Rating Summary
86
3
0
1
2
86
3
0
1
2

Benji

20 years of experience
206 reviews
Benji
20 years of experience
Freestyle 2005 - Engine hesitates during acceleration - Phoenix, AZ
It was good

Rodney

30 years of experience
574 reviews
Rodney
30 years of experience
Freestyle 2007 - Brake Caliper - Sacramento, CA
Rodney was a professional. Kind, clear, set and kept to expectations. He's redeemed the platform. I will only use him through this service in the future. Thank you Rodney for being so excellent.

Juan

5 years of experience
202 reviews
Juan
5 years of experience
Freestyle 2006 - Car is shaking or vibrating - Orlando, FL
Arrived ahead of schedule, very professional, he was very helpful explaining in detail the issues with my car

Phillip

16 years of experience
307 reviews
Phillip
16 years of experience
Freestyle 2007 - Brake Caliper - Sacramento, CA
He is so personal and from. Works quick.

Excellent Rating

(92)

Rating Summary
86
3
0
1
2
86
3
0
1
2
Number of Ford Freestyle services completed
1012+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Mass Airflow Sensor
A A faulty mass airflow meter can cause myriad problems, such as rough acceleration and idling, stalling and hesitation. It may be difficult to diagnose since the failure of a number of parts may mirror these symptoms. The same symptoms...
Symptoms of a Bad or Failing Throttle Body Temp Sensor
Common signs include poor engine performance, stalling, and broken electrical connections.
How Long Does an Oil Temperature Sensor Last?
Oil Oil is vital for engine operation – you can’t drive without it. Trying to run your car’s engine without oil would result in catastrophic damage. However, it’s just as important that the engine oil is monitored at all times....

If I take my foot up off the as it might shoot forward

Hello! Thank you for writing in with this question and concern. A surge like this could be caused by any number of electrical sensors (intake temperature sensor, throttle position sensor, etc.). It could also be caused by a mechanical malfunction...

My yukon is running like nthere is something terribly teribly wrong

The mass air flow sensor measures the speed of the air going into the engine. The P0101 code (https://www.yourmechanic.com/article/-p0101-obd-ii-trouble-code-mass-airflow-maf-circuit-operating-range-or-performance-problem-by-john-nelson) could be an electrical issue. The PO449 code (https://www.yourmechanic.com/article/p0449-obd-ii-trouble-code-evaporative-emission-control-system-vent-valve-solenoid-circuit-malfunction-by-spencer-clayton) is related to fuel tank emissions. Codes give you the area of...

Where is the Crankshaft Position Indicator on a 1998 Infiniti QX4?

The crankshaft position sensor is typically externally mounted on the engine near the crankshaft pulley. I would recommend checking near the crankshaft pulley for this answer. If you need help with the replacement of the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement), I...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com