Ford Focus Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Ford Focus Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Ford FocusL4-2.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$217.68Shop/Dealer Price$236.95 - $286.66
2015 Ford FocusL4-2.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.07 - $210.40
2013 Ford FocusL4-2.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2008 Ford FocusL4-2.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.20 - $274.60
2016 Ford FocusL4-2.0L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$227.67 - $277.18
2001 Ford FocusL4-2.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.24 - $210.69
2018 Ford FocusL4-2.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.24 - $255.47
2006 Ford FocusL4-2.3LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
Show example Ford Focus Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1
Number of Ford Focus Headlight Bulb Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0036 OBD-II Trouble Code: Heater Oxygen Sensor Control (HO2S) Circuit (Bank 1, Sensor 2)
P0036 Trouble Code definition P0036 is the code for Heater Oxygen Sensor Control (HO2S) Circuit (Bank 1, Sensor 2) What the P0036...
How to Choose and Install Subwoofers
While While a factory sound system will do the job, if you want to really “feel” the music, you should install an aftermarket system, and subwoofers are a big part of a high quality aftermarket car stereo system (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-stereo). <img...
Understanding the Ram Oil Change Indicator and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Ram Oil Change Indicator tells you when and what service your car needs.

1995 Suzuki Escudo 16-valve won't start unless spraying the fluid in intake

It starts with starting fluid. That means that the ignition system is working, so you most likely have a fuel system problem. What you want to do is pressure test your fuel pump. You can get any mechanic to do...

I have a 1994 Ford F150 XL 4x4 with a EFI 5.0 liter v8 it has a hard time starting when then engine is warm

Hello. You are most likely having problems with the fuel injectors clogged (https://www.yourmechanic.com/services/fuel-injector-replacement) and there is carbon built up on the valves. Try using an injector and combustion cleaner to clean injectors and reduce carbon buildup on the valves. Have...

I accidentally put diesel in my Mercedes gas tank.

How much damage you did depends on how strong the mixture of diesel was and how far you drove. If the tank was nearly empty you may have messed some stuff up. Getting the car running may not be a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com