logo

Ford Five Hundred Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(5)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Ford Five Hundred Control Arm Assembly Replacement is $349 with $209 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$830.24Shop/Dealer Price$981.56 - $1422.56
2006 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$651.04Shop/Dealer Price$758.34 - $1073.64
2006 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$815.82Shop/Dealer Price$964.36 - $1403.27
2007 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$728.23Shop/Dealer Price$875.65 - $1313.72
2005 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$815.82Shop/Dealer Price$966.71 - $1407.39
2005 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$815.82Shop/Dealer Price$964.58 - $1403.66
2006 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$815.82Shop/Dealer Price$964.38 - $1403.31
2007 Ford Five HundredV6-3.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$815.82Shop/Dealer Price$964.36 - $1403.27
Show example Ford Five Hundred Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Ford Five Hundred Control Arm Assembly Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(5)
Rating Summary
5
0
0
0
0
5
0
0
0
0

Mike

10 years of experience
177 reviews
Request Mike
Mike
10 years of experience
Request Mike
by Sterlena Bland
Five Hundred 2006 - Control Arm Assembly - Raleigh, NC
Mike is very friendly and knowledgeable. You can tell he cares about his clients and making them aware of the service he is providing. I will definitely be a returning customer.

Bryant

8 years of experience
568 reviews
Request Bryant
Bryant
8 years of experience
Request Bryant
by Anthony Gowdy
Five Hundred 2006 - Starter - Indianapolis, IN
Great!

Aurelio

35 years of experience
42 reviews
Request Aurelio
Aurelio
35 years of experience
Request Aurelio
by Craig pfister
Five Hundred 2005 - Exhaust Gas Recirculation/EGR Valve - Cibolo, TX
Great job replacing my ERG valve! Could not have done it on my own. Had all the right tools and patience to turn those rusted bolts.

Jermaine

22 years of experience
147 reviews
Request Jermaine
Jermaine
22 years of experience
Request Jermaine
by Wayne Jung
Five Hundred 2005 - Car starts and then dies - Hyattsville, MD

Excellent Rating

(5)
Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Ford Five Hundred Control Arm Assembly Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

Disabled Driver Laws and Permits in Idaho
Disabled Disabled driver laws vary from state to state. It is important that you understand the rules in your state, whether you are a disabled driver or not. How do I know if I am eligible for a disabled parking...
Read more
P0138 OBD-II Trouble Codes: O2 Sensor Circuit High Voltage (Bank 1, Sensor 2)
P0138 code definition O2 Sensor Circuit High Voltage (Bank 1, Sensor 2) What the P0138 code means P0138 is the OBD-II generic...
Read more
P0053 OBD-II Trouble Code: HO2S Heater Resistance (Bank 1 Sensor 1)
P0053 code definition HO2S Heater Resistance (Bank 1 Sensor 1) What the P0053 code means This code means the Heated Oxygen Sensor...
Read more

How do you set the zone on the compass?

If your car is equipped with an electronic compass, you might find that you need to set the zone correctly. This is because magnetic north and true north are not always the same – it depends on where you’re located...
Read more

Reverse not working , though other gears still do.

Assuming your vehicle has a manual transmission, it is possible that your shift cable bushings could be severely worn causing the reverse gear not to engage as this is a common problem on Dodge vehicles. If the shift cable bushings...
Read more

Steering wheel difficult to turn

When the steering wheel is difficult to turn the vehicle is unsafe to drive until repairs have been performed. These symptoms usually mean the power steering system has failed. The most common cause of the power steering system failing is...
Read more
  1. Home
  2. Estimates
  3. Ford
  4. Five Hundred
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE