Ford Festiva Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Ford Festiva Serpentine/Drive Belt Replacement is $166 with $26 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Ford FestivaL4-1.3LService typeSerpentine/Drive Belt ReplacementEstimate$214.10Shop/Dealer Price$232.48 - $279.50
1991 Ford FestivaL4-1.3LService typeSerpentine/Drive Belt ReplacementEstimate$205.09Shop/Dealer Price$221.70 - $267.40
1992 Ford FestivaL4-1.3LService typeSerpentine/Drive Belt ReplacementEstimate$205.09Shop/Dealer Price$221.72 - $267.44
1993 Ford FestivaL4-1.3LService typeSerpentine/Drive Belt ReplacementEstimate$205.09Shop/Dealer Price$221.72 - $267.44
Show example Ford Festiva Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Ford Festiva services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

What Is Engine Displacement?
Engine displacement is the swept volume of pistons inside the cylinders. Displacement has an impact on increasing car power or fuel efficiency.
How to Put Flames on Your Car
Flames Flames on the side of a car are a throwback to the days of the hot rod, and many people enjoy decorating their cars with this iconic imagery. Painting flames on a vehicle is easy when you use the...
Disabled Driver Laws and Permits in Wyoming
If If you live in the State of Wyoming, and you have a disability, then you can get special permits that will allow you to park in special spots and also enjoy other privileges that are not available to you...

The car won't start after the gas that was a few days in the sun, is put in

Hello. The gas that you used should not have any problems after only a few days. If the fuel was that low, the issue may be a failed fuel pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-pump). When the fuel gets this low, the pump overheats...

I installed a new crankshaft positioning sensor, now I'm getting misfires and code P0300. Is this supposed to happen?

Assuming you replaced your vehicle's crankshaft position sensor for a P0335 trouble code and that code has not returned, this leads me to believe that the new sensor is either faulty or misadjusted. The sensor replacement should not have caused...

Vehicle shaking

There could be a combination of faults creating the shaking effect you are feeling. Certain tire defects, particularly internal belt damage or separations, as well as irregular tire wear will cause vehicle shaking, or shimmy, and such could be "set...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com