Ford Falcon Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Ford Falcon Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1964 Ford FalconL6-3.3LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1970 Ford FalconV8-7.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1964 Ford FalconL6-2.8LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1962 Ford FalconV8-3.6LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1969 Ford FalconV8-5.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1970 Ford FalconL6-3.3LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1968 Ford FalconL6-2.8LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1968 Ford FalconL6-3.3LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Ford Falcon Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

David

36 years of experience
195 reviews
David
36 years of experience
Ford Falcon V8-4.3L - Car is not starting - Santa Monica, California
David is great - quickly diagnosed my problem and got me on the road again - he really knows what he is doing and is trustworthy - he is my new GO TO mechanic!

Jonathan

35 years of experience
483 reviews
Jonathan
35 years of experience
Ford Falcon V8-4.3L - Electric Problems - Clearwater, Florida
He was very friendly and explained everything he did

Lavell

28 years of experience
230 reviews
Lavell
28 years of experience
Ford Falcon L6-2.4L - Oil Change - San Lorenzo, California
Labels Was here on time and did a great job had it done very fast and efficient very personable person enjoyed having him work on my vehicle I would recommend him as excellent thank you Larry c Smith

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Ford Falcon V8-4.7L - Inspection / Diagnostics - Irvine, California

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Ford Falcon services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace a Lost or Stolen Car Title in Hawaii
Once Once your car is paid off, the lender should mail you the physical title to the vehicle. This is proof that you own the car outright. However, many of us don’t take the proper care of that essential document....
P0703 OBD-II Trouble Code: Torque Converter/Brake Switch B Circuit Malfunction
P0703 Code means the PCM has registered a fault in the brake switch B circuit due to failed brake lamp switch, faulty fuse or socket
P0772 OBD-II Trouble Code: Shift Solenoid E Stuck On
P0772 means that a problem in the shift solenoid was detected, usually in the form of an incorrect gear ratio due to low or dirty transmission fluid.

Car makes a clicking sound when turning

Hello! One general giveaway of a bad CV axle is a clicking sound when turning. CV axles are vital to the stability of the vehicle and they transfer the power to the wheels to make them turn. Noisy CV axles...

2001 Honda Civic EX 2dr 1.7ltr 4cyl, flashing green key, stalled out. Replaced the Load, Idle Air control &map sensor, won't start

The green key warning light will only be continuous when the engine is running if the immobilizer module or the PCM is faulty. If the warning light is still on constantly while you are presently trying to re-start the car,...

2007 Dodge Caliber jerking motion while driving new crank and cam shaft as well as tune up and oil change what could be the proble

It is possible that an issue such as this would be associated with a check engine light. I would recommend having any trouble codes that are stored in your system read by a qualified professional to determine the exact cause...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com