Ford Fairmont Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(29)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(29)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ford Fairmont Fuel Injector Replacement is $857 with $753 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1980 Ford FairmontL6-3.3LService typeFuel Injector ReplacementEstimate$2028.33Shop/Dealer Price$2514.79 - $3949.42
1981 Ford FairmontV8-4.2LService typeFuel Injector ReplacementEstimate$2089.51Shop/Dealer Price$2596.79 - $4093.82
1978 Ford FairmontL4-2.3LService typeFuel Injector ReplacementEstimate$1610.13Shop/Dealer Price$1997.56 - $3135.05
1982 Ford FairmontL4-2.3LService typeFuel Injector ReplacementEstimate$1610.13Shop/Dealer Price$1997.53 - $3135.01
1979 Ford FairmontL4-2.3LService typeFuel Injector ReplacementEstimate$1610.13Shop/Dealer Price$1997.58 - $3135.08
1980 Ford FairmontL4-2.3LService typeFuel Injector ReplacementEstimate$1610.13Shop/Dealer Price$1997.56 - $3135.05
1978 Ford FairmontL6-3.3LService typeFuel Injector ReplacementEstimate$2011.83Shop/Dealer Price$2498.16 - $3932.69
1980 Ford FairmontV8-4.2LService typeFuel Injector ReplacementEstimate$2095.01Shop/Dealer Price$2602.54 - $4099.77
Show example Ford Fairmont Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(29)

Rating Summary
27
2
0
0
0
27
2
0
0
0

John

20 years of experience
563 reviews
John
20 years of experience
Ford Fairmont L6-3.3L - Brake Hose Replacement (Driver Side Front, Passenger Side Front, Driver Side Rear) - Orlando, Florida
John was punctual and pleasant. He knew what he was doing, was familiar with my type of car and completed the work quickly.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Ford Fusion L4-2.5L - Fuel Injector - Humble, Texas
Great service

Robert

20 years of experience
1089 reviews
Robert
20 years of experience
Ford Ranger L4-2.3L - Fuel Injector - Arvada, Colorado
Robert very good

Alexander

20 years of experience
113 reviews
Alexander
20 years of experience
Ford Mustang V6-4.0L - Fuel Injector - Orlando, Florida
The repair that was recommended by a previous mechanic was not required and Alexander found the real root cause. Job well done. Very professional and friendly mechanic.

Excellent Rating

(29)

Rating Summary
27
2
0
0
0
27
2
0
0
0
Number of Ford Fuel Injector Replacement services completed
319+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Prepare for the Florida Driver’s Written Test
Are Are you excited to get your Florida driver’s permit so you can learn how to drive? It’s an exciting time, but you have to pass the state’s written exam before you are able to get your permit. Passing this...
P0253 OBD-II Trouble Code: Injection Pump Fuel Metering Control "A" Low (Cam/Rotor/Injector)
P0253 means the fuel control actuator and the fuel metering sensor are not communicating well due to a faulty actuator, or a circuit issue.
B1997 OBD-II Trouble Code: Passenger Side Side-Mount Air Bag Circuit Short to Ground
B1997 trouble codes means the side mount air bag has a circuit malfunction, caused by blown fuses, shorted wires, or a failed side air bag system.

AC works well briefly, then blows warm

Hello there. A few different things can cause the AC to shut off after a short while. The first being an overfilled AC refrigerant. When this occurs, the pressure in the system rises too high and causes the AC to...

Need the exhaust manifold changed on this vehicle.

Look to see where the exhaust sound is coming from and determine if the manifold is cracked or if the gasket is burned. If the exhaust leak is coming from where the wide pipe under the car connects to the...

My 2001 tahoe wont reverse

Hi there. Most transmission problems like you've described can be resolved by having the transmission fluid flushed and filter replaced. Transmissions are hydraulic systems that rely on clean and efficient fluid to shift, allow acceleration and deceleration as well. However,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com