Ford F-250 HD Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Ford F-250 HD Parking brake is stuck Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford F-250 HDV8-5.8LService typeParking brake is stuck InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Ford F-250 HDV8-7.3L Turbo DieselService typeParking brake is stuck InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Ford F-250 HDV8-7.5LService typeParking brake is stuck InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Ford F-250 HD Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1

Luis

12 years of experience
78 reviews
Luis
12 years of experience
Ford F-250 HD V8-7.5L - Water Pump - Albuquerque, New Mexico
He did a great job.

Miguel

21 years of experience
247 reviews
Miguel
21 years of experience
Ford F-250 HD V8-5.8L - Car is not starting - New Milford, New Jersey
I had a no start issue with my f-250. I tried all the bases, but Miguel found the problem I suspected. Well see how the repair goes. He was very kind and knowledgeable. Points you in the right direction

Edgar

14 years of experience
38 reviews
Edgar
14 years of experience
Ford F-250 HD V8-5.8L - Distributor - New Milford, New Jersey
He did a great job. On time and got my truck fixed in no time. Highly recommend Edgar .

Chris

22 years of experience
2241 reviews
Chris
22 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Car is making a noise - Costa Mesa, California
Super knowledgeable, quick, fixed my problem right on the spot!

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1
Number of Ford F-250 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You’re a Caterer
If If you are in the catering business, you need a reliable vehicle that will provide you with what you need to transport your food, linens, and other supplies. Generally speaking, you're better off buying gently used, because you will...
P0329 OBD-II Trouble Code: Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)
P0329 P0329 code definition? Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor) What the P0329 code means A knock sensor is used to optimize engine performance. It also helps protect the engine against potentially dangerous and power...
Disabled Driver Laws and Permits in Texas
In In the State of Texas, if you have a disability, you can apply for various permits under Texas law that will entitle you to park in designated spaces, and at no cost in metered spaces. Summary of Texas disabled...

Problems with ABS

The odometer most likely stopped because there is a problem with the vehicle speed sensor. This sensor tells the computer how fast and how far the car is going, so it knows how many miles to count on the odometer....

Diagnostic code read o2 sensor bad, replaced o2 sensor, cleared code but engine light came back on, is it caused by bad air filter

Hello there. Typically jump starting a vehicle doesn't trigger an OBD-II error code. However, one of the most common misdiagnosis issues with the P-2270 (https://www.yourmechanic.com/article/p2270-obd-ii-trouble-code-o2-sensor-signal-stuck-lean-bank-1-sensor-2-by-jay-safford) is replacing the O2 sensor before diagnosing if there are any exhaust leaks. Obviously, you'll...

We have a 2008 Dodge Magnum 2.7 and have replaced the thermostat and thermostat housing. However, the car is still leaking a good amount of coolant.

When there is coolant leaking from the weep hole on a water pump (https://www.yourmechanic.com/services/water-pump-replacement), the seal on the water pump is damaged and no longer can hold in the coolant. I recommend replacing the water pump. The weep hole is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com