Ford F-150 Heritage Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Ford F-150 Heritage Brake Master Cylinder Replacement is $326 with $144 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford F-150 HeritageV8-4.6LService typeBrake Master Cylinder ReplacementEstimate$488.96Shop/Dealer Price$565.51 - $784.61
2004 Ford F-150 HeritageV8-5.4LService typeBrake Master Cylinder ReplacementEstimate$477.25Shop/Dealer Price$551.50 - $768.88
2004 Ford F-150 HeritageV6-4.2LService typeBrake Master Cylinder ReplacementEstimate$477.25Shop/Dealer Price$551.53 - $768.94
2004 Ford F-150 HeritageV8-5.4L TurboService typeBrake Master Cylinder ReplacementEstimate$477.25Shop/Dealer Price$551.53 - $768.93
Show example Ford F-150 Heritage Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0

Walter

47 years of experience
416 reviews
Walter
47 years of experience
Ford F-150 Heritage V8-5.4L Turbo - Alternator Repair - Owasso, Oklahoma
Very knowledgeable mechanic he definitely knows what he is doing.

Oreste

15 years of experience
149 reviews
Oreste
15 years of experience
Ford F-150 Heritage V8-4.6L - Car is not starting - Miami, Florida
Very friendly and efficient, great service!

Joseph

34 years of experience
540 reviews
Joseph
34 years of experience
Ford F-150 Heritage V6-4.2L - Car is not starting - Dallas, Texas
On time and worked hard. Gave me some good advice, but my truck still doesn't run.

Ramon

21 years of experience
166 reviews
Ramon
21 years of experience
Ford F-150 Heritage V6-4.2L - Pre-purchase Car Inspection - Tucson, Arizona
Nice guy, knowledgeable. Would definitely recommend.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0
Number of Ford F-150 Heritage services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Ship a Car
It used to be that if you wanted to buy a car you’d head to the nearest auto mall, and spend the day shopping. After a while the cars, dealerships, salespeople, and deals blended together. Who hasn’t made an offer...
The Guide to Legal Car Modifications in Oklahoma
ARENA Creative / Shutterstock.com If you have a modified vehicle and either live in Oklahoma or plan to do so in the near future, you need to understand the laws that you have to follow in order...
How to Transfer a Car Title in Oregon
The The state of Oregon requires that all vehicles have a title, and that the title show the name of the current owner. When a car is bought or sold, the title must be updated to reflect the new owner’s...

Why does my engine stall so much?

Greetings and thank you for writing in with this question! Does the Check Engine Light illuminate when the vehicle stalls? If so, a certified mechanic (like those with YourMechanic) can scan the vehicle computer for codes. This type of stalling...

Noise when braking at low speed

Hello. I am not sure of your description of the sound, but I think you are describing a brake rotor runout causing the brake pads to gyrate and make a noise at low speeds and light braking it is most...

Odd noise when I turn at low speeds.

From what you've described your power steering pump is probably bad. You need to check the oil in it to make sure its not too low, however, I think it's already bad. Once you hear that noise there really isn't...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com