Ford Edge Brake rotors are turning blue Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(507)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(507)

Brake rotors are turning blue Inspection Service

How much does a Brake rotors are turning blue Inspection cost?

On average, the cost for a Ford Edge Brake rotors are turning blue Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Ford EdgeL4-2.0L TurboService typeBrake rotors are turning blue InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Ford EdgeV6-3.5LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Ford EdgeV6-2.7L TurboService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 Ford EdgeV6-3.5LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2014 Ford EdgeV6-3.7LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Ford EdgeV6-3.5LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Ford EdgeV6-3.5LService typeBrake rotors are turning blue InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2019 Ford EdgeV6-2.7L TurboService typeBrake rotors are turning blue InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Edge Brake rotors are turning blue Inspection prices

In a disc brake system, your calipers, pads and rotors are vital components for operation and safe slowing and stopping. In normal circumstances, your rotors should be silvery or gray. However, under some conditions, they can turn blue. This is a sign that there’s something wrong with your brakes, and it’s highly advised that you take action as soon as possible.

How this system works:

Disc brakes are actually pretty easy to understand. Pressurized brake fluid is sent through the lines from the master cylinder. In the caliper, the fluid actuates a piston, which effectively closes the caliper. This pinches the brake rotor between the inner and outer brake pads.

The harder you press the brake pedal, the harder the caliper pinches/squeezes the rotor. In a car equipped with antilock brakes, the ABS system keeps them from locking up by pulsating the brakes dozens of time per second.

The squeezing action of the caliper and pads against the rotor creates friction and heat. Friction is a necessary component here–it’s what slows and stops your car. Heat is unavoidable, but excessive temperatures can actually cause damage. This is where bluing can occur. If one of your rotors has turned blue, it’s important to have the problem diagnosed, as it’s an indication that something’s wrong. Over time, it could even lead to cracking of the rotor and damage to the pads, as well as compromising your safety on the road.

Common reasons for this to happen:

  • Locked Caliper: One very common reason for rotors to turn blue is that the caliper is locked and the brake pads remain in almost constant contact with the metal. This might be slight enough that you don’t notice any drag during normal operation, but it will be enough to generate significant heat and wear.

  • Corroded Slide Pins: Your car’s calipers slide back and forth on metal pins. These pins need to be well lubricated, clean and free of debris. If they become corroded, the caliper will not slide in and out properly and can remain too close to the rotor rather than moving back to the start position.

  • Pinched/Deteriorating Brake Line: Your brakes work on hydraulic pressure. If there’s damage to one of the brake lines (a kink, or internal damage to the liner that limits the amount of fluid flowing in and out), it can cause your caliper to stay at least slightly engaged at all times. This generates heat and blues your rotor.

  • Driver Error: If you’re a “two-footed” driver or regularly ride your brakes because you do a lot of stop and go driving or live in an area with lots of hills, you could be the inadvertent cause of the problem. Constantly engaging your brakes causes the same buildup of heat as having a locked caliper, but you’ll notice bluing on two or four rotors, rather than just one.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your brake system, including the caliper, rotor, lines, pads and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire system visually. A test drive may be necessary, as well as other diagnostic steps. The mechanic will determine if there is drag on the affected wheel/wheels from a locked caliper and then advise you on the next step in the repair process.

How important is this service?

Having brake rotors that turn blue is more than just an anomaly. It can become an expensive problem, and it can also reduce your safety on the road. Extreme heat can cause your rotors to warp and even crack, and your brake pads will deteriorate rapidly, leaving you with less stopping power. If the problem affects both front brakes, you may also notice brake fade. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(507)

Rating Summary
480
15
3
3
6
480
15
3
3
6

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Ford Edge V6-3.5L - Wheel Hub Assembly Replacement (Passenger Side Rear) - Glenview, Illinois
Fast, excellent work, and explained things every step of the way.

Yoel

9 years of experience
212 reviews
Yoel
9 years of experience
Ford Edge V6-3.5L - Oil Change - Philadelphia, Pennsylvania
Great

Andrew

15 years of experience
506 reviews
Andrew
15 years of experience
Ford Edge V6-3.5L - Brake Pads Replacement (Front) - Gresham, Oregon
This is the 2nd time Andrew’s worked on my car. He’s on time and works quickly! He changed out both sets of brake pads and inspected my car to give me other recommendations for what should/could be done soon. He’s very knowledgeable and is able to answer any questions I had.

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Ford Edge V6-3.5L - Power Outlet is not working - Hoffman Estates, Illinois
Great job! Arrived early and finished the repair quickly. Will use you again!

Excellent Rating

(507)

Rating Summary
480
15
3
3
6
480
15
3
3
6
Number of Ford Edge services completed
5577+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

P0298 OBD-II Trouble Code: Engine Oil Over Temperature Condition
P0298 means that the engine is or has recently overheated due to low coolant level, faulty cooling fan, thermostat, or radiator.
P0849 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch B Circuit Intermittent
P0849 means there is an issue with the transmission fluid levels, possibly due to hydraulic line blockage, faulty components, or bad fluid level.
B1908 OBD-II Trouble Code: Air Bag Crash Sensor #2 Ground Circuit Short to Battery
B1908 means there is a malfunction with the #2 airbag crash sensor circuit, likely due to a bad electrical component or defective sensor.

Water blowing out tailpipe.

The first thing I would have to ask is if the cooling system is getting low on coolant. Does the engine run rough or misfire? The water coming out of your tail pipe may be just that, water due to...

How do I recline the front seats?

It only takes a few seconds to recline the front seats. To do so, first locate the recline lever on the outboard side of the seat. Then, pull the lever, and push the seat into the desired reclining position. Release...

starter/fuel pump fuse keeps blowing.

Hi there. This problem is commonly caused by a frayed or exposed wire within the fuel pump or the fuel pump relay. When the signal is sent to the fuel pump by the ignition relay, the exposed wire will create...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com