Ford EcoSport Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(52)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(52)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford EcoSport Power Steering Pressure Hose Replacement is $225 with $102 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Ford EcoSportL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$352.55Shop/Dealer Price$416.31 - $578.36
2018 Ford EcoSportL3-1.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$326.55Shop/Dealer Price$390.34 - $552.40
Show example Ford EcoSport Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(52)

Rating Summary
51
0
1
0
0
51
0
1
0
0

Derrick

11 years of experience
170 reviews
Derrick
11 years of experience
Ford EcoSport L4-2.0L - Battery - Oakland, California
It was the best experience that I have in the Bay Area. He was professional, friendly and knowledgeable in his craft, and would highly recommend him to anyone that needs their car fixed on the spot.

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
Ford Expedition V8-4.6L - Power Steering Pressure Hose - Charlotte, North Carolina
Great experience! Jeffery was professional and so knowledgeable. He explained each aspect to me and gave tips on how to get the truck running better. So happy with the service and will be using again!

Roger

14 years of experience
51 reviews
Roger
14 years of experience
Ford Expedition V8-5.4L - Power Steering Pressure Hose - Pittsburg, Kansas
Always on time and gets the job done right! Highly recommend Roger; and I’m a car guy so I know a good mechanic and Roger knows his trade. Top notch work.

Collins

12 years of experience
488 reviews
Collins
12 years of experience
Ford Taurus V6-3.5L - Power Steering Pressure Hose - Atlanta, Georgia
He great..in helping me get my car back right...

Excellent Rating

(52)

Rating Summary
51
0
1
0
0
51
0
1
0
0
Number of Ford Power Steering Pressure Hose Replacement services completed
572+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Understanding the Different Types of Oil Filters
The The motor oil that you put into your engine, along with its additives, works to absorb and hold organic and inorganic contaminants. Organic contaminants can include bacteria, bugs, and oxidized oil. Inorganic impurities can include metallic particles, wearing off...
Symptoms of Bad or Failing Interior Door Handles
If a car door will not open or close, feels loose, or takes more effort to pull open, you may need to replace the interior door handle.
How to Claim Your New Car as Tax Deductible
When you buy a new car, you’ll likely finance (https://www.yourmechanic.com/article/what-s-the-cheapest-way-to-finance-buying-a-car) a large portion of your purchase. Very few people can pay for the whole amount up front. Unless you are able to obtain 0% interest on your vehicle loan, your...

How do I adjust the aim of the headlights?

Your headlights can be adjusted to ensure that the beam strikes the road correctly for good nighttime illumination. While the headlights were adjusted correctly when you bought the car, there are things that can throw off the aim, including: Towing...

Police interceptor makes grinding sounds

The noise is coming from the internal transmission bearing or overriding clutches. Not all of these parts may have been replaced when the transmission was overhauled. I can only recommend having a qualified transmission mechanic come and listen to the...

Adblue light went on. Put exhaust fluid in. I thought it was fine but countdown went to warning and said car will not restart. I stopped to get more and filled to brim. Warning will not go off and car will not start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com