Ford E-350 Super Duty Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(159)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(159)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ford E-350 Super Duty Fuel Injector Replacement is $639 with $496 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Ford E-350 Super DutyV10-6.8LService typeFuel Injector ReplacementEstimate$2545.20Shop/Dealer Price$3147.76 - $4914.93
2000 Ford E-350 Super DutyV8-7.3L Turbo DieselService typeFuel Injector ReplacementEstimate$5129.00Shop/Dealer Price$6386.54 - $10118.58
2018 Ford E-350 Super DutyV8-6.2LService typeFuel Injector ReplacementEstimate$1280.50Shop/Dealer Price$1575.91 - $2421.58
2013 Ford E-350 Super DutyV8-5.4LService typeFuel Injector ReplacementEstimate$1744.18Shop/Dealer Price$2152.72 - $3333.36
2005 Ford E-350 Super DutyV8-6.0L Turbo DieselService typeFuel Injector ReplacementEstimate$6647.32Shop/Dealer Price$8166.52 - $12489.35
2005 Ford E-350 Super DutyV8-5.4LService typeFuel Injector ReplacementEstimate$1135.09Shop/Dealer Price$1398.26 - $2153.98
2015 Ford E-350 Super DutyV8-5.4LService typeFuel Injector ReplacementEstimate$1755.80Shop/Dealer Price$2164.52 - $3346.21
2018 Ford E-350 Super DutyV10-6.8LService typeFuel Injector ReplacementEstimate$1524.26Shop/Dealer Price$1878.79 - $2900.84
Show example Ford E-350 Super Duty Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(159)

Rating Summary
151
3
1
0
4
151
3
1
0
4

Travis

13 years of experience
579 reviews
Travis
13 years of experience
Ford E-350 Super Duty V10-6.8L - Engine is misfiring Inspection - Saint Paul, Minnesota
Travis was a great diagnostician and also wise enough to know when not to do something he wasn't equipped for. I feel better talking to my regular mechanic now that I know what the problem is and how much I can expect it to cost. Will call Travis again when the need arises!

Arturo

27 years of experience
303 reviews
Arturo
27 years of experience
Ford E-350 Super Duty V8-5.4L - Battery will not hold a charge - El Cajon, California
Excelent profissional.

Dominic

28 years of experience
223 reviews
Dominic
28 years of experience
Ford E-350 Super Duty V10-6.8L - Throttle Position Sensor - Cape Coral, Florida
Excellent

David

27 years of experience
182 reviews
David
27 years of experience
Ford E-350 Super Duty V10-6.8L - Pre-purchase Car Inspection - San Francisco, California
David was awesome! He was super professional and calm despite the chaotic environment I sent him to. He was flexible and did an amazing job with a prepurchase inspection despite the seller acting completely bizarre and unreasonable. I'm so glad this service exists! It was a lifesaver and helped me avoid a bad purchase from a sketchy seller. Grateful an impartial expert was on hand. Yourmechanic.com had lots of time slot options and were flexible about last minute changes. I highly recommend them!

Excellent Rating

(159)

Rating Summary
151
3
1
0
4
151
3
1
0
4
Number of Ford E-350 Super Duty services completed
1749+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

P2059 OBD-II Trouble Code: Reductant Injection Air Pump Control Circuit/Open
P2059 P2059 code definition Reductant Injection Air Pump Control Circuit/Open What the P2059 code means P2059 is an OBD-II generic code indicating that the Engine Control Module (ECM) detects that the reductant injection air pump control circuit has an open...
How to Get a California Driver's Permit
Like Like most other states, California uses a graduated driver licensing program, which means that teenagers under the age of 18 must apply for a learner’s permit before they can receive a standard driver’s license. In order to obtain a...
Veteran and Military Driver Laws and Benefits in Montana
The The state of Montana offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Many of these benefits require you to...

I can't get my bike to roll in gear when the clutch is pulled.

Try adjusting the clutch cable until you have very little free travel before it starts to pull the clutch in. You should be okay then to put it together and start the engine in neutral and exercise the clutch in...

Oil leak

The timing chain tensioner fix is a common issue with this vehicle. There are several possibilities as to where this leak may be coming from. Crank seal and valve cover gasket (https://www.yourmechanic.com/services/valve-cover-gasket-replacement) are two others I would recommend checking. I...

How often should I lubricate suspension? I have a 2012 Jeep Grand Cherokee.

The published maintenance schedule for your vehicle only lists an inspection recommendation for the front suspension and that would be every 6,000 miles. There is no reference to lubricating ball joints or tie rod ends, on the maintenance schedule, presumably...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com